HiBoost F23 Manual del usuario - Página 15
Navegue en línea o descargue pdf Manual del usuario para Amplificador HiBoost F23. HiBoost F23 19 páginas.
Imprimir páginaLED
Status
Remain still
Flashing but actual gain
is not more than 30dB less
than rated gain
ISO
status
Flashing but actual gain
is more than 30dB less
than rated gain
More about "AGC" indication: Flashing ALC indicates if the booster has a
strong receiving power
LED
Status
Remain still
Flashing but actual gain
ALC
is not more than 30dB
status
less than rated gain
Flashing but actual gain
is more than 30dB less
than rated gain
Notes: The flashing ISO and ALC status are to show you that ISO and ALC functions
Meaning
No loop back or
no self-oscillation
Slight loop back
or self-oscillation
Deep loop back
or self-oscillation
Meaning
Check coverage, leave it if it is good;
take below actions to increase signal if
coverage is not good.
Output power is
1. Adjust the antenna direction or
not weak or just
location to get stronger receiving
suitable
signal
2. Replace current antenna with higher
gain to get stronger receiving signal
Full output power
Working properly
Working properly, but too strong signal,
actions are recommended:
1. Adjust the antennas' directions or
Too strong
locations to lower down input power.
receiving signal
2. Reduce the booster's gain by
external attenuator or replace with
lower gain antenna if the above
methods don't work.
15
Solve methods
NO action is needed
NO action is needed
Working properly, but deep loop,
below actions are recommended:
Adjust the antennas' directions or
locations to enlarge the distance.
Add the vertical or horizontal
distance between outdoor and
indoor antennas.
Use the barrier like walls to
increase the isolation.
Reduce the booster's gain by
external attenuator or replace
with lower gain antenna if the
above methods don't work.
Solve methods