HiBoost Hi10-5S Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Repetidor HiBoost Hi10-5S. HiBoost Hi10-5S 12 páginas.

2. Push the cable firmly into the jack on both the antenna and the booster, then

turn the connector sleeve clockwise until the connectors are tight.

3. Find a location to mount the indoor panel antenna and permanently mount

the indoor antenna panel antenna with the hardware provided in the kit.

plastic expansion

bolt

Note: It is important that the indoor and outdoor antennas are pointed away

from each other.

The outdoor signal strength will affect performance. It is important that users

install the outdoor antenna in the right position on a mast that is mounted

outside from the roof, balcony or ground.

It may help to visit an online resource such as www.cellmapper.net,

www.cellrecption.com or www.antennasearch.com

1. Once the best location is located, use the hardware provided in the kit to

mount the outdoor antenna on a mast pointing towards the nearest cell phone

tower.

2. Connect the outdoor antenna transmission cable to the coaxial cable

provided in the kit, then connect the coaxial cable to the outdoor port on the

booster.

Note:

• It 1s easier to optimize the outdoor antenna installation using the Signal

Supervisor app since it can determine real-time signal measurements using the

outdoor antenna and signal booster.

• Find the best location for the outdoor antenna by using a cell phone to monitor

the number of signal bars being received while slowly moving around to

different locations.

• It is recommended that users perform multiple tests while moving around to

different locations- refresh the signal bar readings by turning off and on

airplane mode on the cell phone.

• It is important to gain height above nearby obstructions (such as trees,

buildings, etc.) while mounting the outdoor antenna on mast.

We Improve Your Mobile Signal

hanging folder