Hiboy S2R Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Scooter Hiboy S2R. Hiboy S2R 14 páginas.

3. Assembly

Preparation

1. Unfold the stem and close the folding mechanism until

you hear a click. Then turn the locking lever and insert into

Attach the steering column

Connect the cable from the

Attach the steering column

Connect the cable from the

the hole and you hear the other click.

and fold out the kickstand.

handlebar to the cable from

and fold out the kickstand.

handlebar to the cable from

the steering column.

3. Ensure your scooter can be turned on and off.

Place the handlebar on the

steering column.

the handlebar with the 6

Place the handlebar on the

screws.

Preparation

2. Note: Please connect the wire on the inside of the

handlebar to the wire that is on the inside of the stem.

Attach the steering column

Then slide the handlebar onto the stem, make sure it'

and fold out the kickstand.

the right way round.

4. Put the all 6pcs screws into the holes,then tighten

the each screws properly.

Place the handlebar on the

ATTENTION:

Connect the cable from the

handlebar to the cable from

the steering column.

Double Lock Folding Mechanism

You have to finish below 2 steps before riding,

1. Unfold the stem and close the folding mechanism until you hear a click.

2. Then turn the locking lever and insert into hole and you hear the other click.

storage. Proceed as follows:

9. Folding&Unfolding

When folding the scooter,switch off the electric scooter,loosen the lock lev

on the rear fender; When unfolding the scooter, unlock the bell clip from th

position, and fix the folding mechanism.

1. Open the lo

ing column.