Hiboy VE1 PRO Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Scooter Hiboy VE1 PRO. Hiboy VE1 PRO 14 páginas. 16" electric scooter
También para Hiboy VE1 PRO: Manual del usuario (10 páginas)

Imprimir página

Screen Display

Speed display

Battery display

Gear display

Item name

Item display

G ear Mode

Click

and

button to adjust

Gear Mode 1Gear(8MPH),2Gear(16MPH),3Gear(23MPH)

Item Name

ODO:Total mileage display // DIS:Single time range display // VOL:Voltage(Press power button to switch item name)

Throttle:

Press throttle to accelerate

Battery Display

Each battery bar represents 20% powe r, when the battery is below 20%,

the battery needs to be charged

Upsﬁft

Power button

Downshift

Throttle

4. Assembly and Set up

Before you begin: Remove contents from box. Remove the separators that protect the components from damage during shipping.

Inspect the contents of the box for scratches in the paint, dents, or kinked cables that may have occurred during shipping. Because

the electric scooter was partially assembled and packed at the factory, there should not be any problems, even if the box has a few

scars or dents.

MAKE SURE POWER SWITCH IS TURNED "OFF" BEFORE CONDUCTING ANY ASSEMBLY OR MAINTENANCE PROCEDURES.

Hiboy recommends assembly by an adult with experience in bicycle mechanics.

Unfold the scooter(Open the folding lock)

Attaching the Handlebars

Required Tools: 5 mm Allen Wrench (included)

1. Loosen the screw on Top of T-tube

2. Put the handle bar on(the thread part should be in the middle)

3. Tighten the screw

Note: The Angle of handle can be adjusted according to personal habit during installation.

Tighten the Rod of Rear Fender

Required Tools: 3 mm Allen Wrench (included)

1. Loosen the screw on rear wheel (See image)

2. Align the rod with the hole

3. Tighten the screw

Attaching the headlight

Required Tools: 2 mm Allen Wrench (included)

1. Loosen the screw on headlight

2. Align the headlight with the hole on the top of front fork

3. Tighten the Screw

Need Help? Please search "Hiboy us" on Youtube website to ﬁnd our Channel. You can watch the Installation video

of VE1 PRO. Or contact Hiboy after-sale team by email: support @hiboy.com.