DaytonAudio BTH1 Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Auriculares DaytonAudio BTH1. DaytonAudio BTH1 4 páginas.

Thank you for purchasing the Dayton Audio BTH1 Bluetooth Headphones.

Their Bluetooth technology frees you from the tangle of traditional headphone

cables, and with CRS aptX, you can expect the very best audio quality

when streaming music. Features like convenient onboard controls, a built-

in microphone, and a tough rubberized headband make these awesomely

affordable headphones great for home or on the go.

• CSR aptX Bluetooth codec streams near CD-like quality audio

• Foldable design and durable hard shell case prevent damage while traveling

• On-board controls: volume up/down, next/previous track, play/pause, and phone call

• Tough, rubberized headband and ear cups

• 6-8 hours of playtime on a single charge

• 3.5 mm jack gives the option of a traditional wired connection

• Built-in microphone lets you talk hands free when paired with a phone

• Dayton Audio BTH1 Bluetooth Headphones

• Micro USB charging cable

• Male to male 3.5 mm AUX audio cable

• Hard shell travel case

To turn ON the headphones, press and hold the power button. You will hear a

Bluetooth headphones and Bluetooth enabled device within 3 feet of each other

during the pairing process. Set your Bluetooth enabled device to search for

select"BTH1"from the list of found devices. If required, enter the password 0000.

Select Ok or Yes to pair with your device.

After a successful registration, a tone will be heard and the LED indicator light

will slowly blink blue.

If you would like to connect the headphones to another device, you must

Bluetooth settings, select "BTH1", then select "unpair". When the headphones

have been unpaired, they automatically go into pairing mode again.

Switch ON the headphones. Connect one end of the included 3.5 mm AUX cable

to the AUX In jack on the headphones, and the other end of the cable to an

PLAY to start playing your music.

Connect the small end of the Micro USB cable to the charging port on the

USB port or an AC adapter (not included). The LED indicator light turns RED

when charging. It will turn off when fully charged.