GAI-Tronics PHP400 Manual de instalación y uso - Página 11
Navegue en línea o descargue pdf Manual de instalación y uso para Teléfono GAI-Tronics PHP400. GAI-Tronics PHP400 20 páginas. Analogue version (1090/1099 series) with ampetronic hls-dm2 induction loop amplifier 230v ac power supply
También para GAI-Tronics PHP400: Manual de instalación y uso (20 páginas), Manual de diseño, instalación y uso (20 páginas)
Imprimir página
Programming and Option Settings
7.
Programming and option setting is done remotely by sending commands down the
telephone line to the unit. This can be done by either using a tone phone, or by using
GAI-Tronics TMA – a PC software application.
Quick Programming Guide (using a tone phone).
7.1.
Stage
1
Call the SMART
phone
2
Put the phone
into maintenance
mode
Enter the access
3
PIN
4
Confirm access
the phone is now in maintenance mode and ready to receive programming commands,
5
eg:
Program
memory 1
Program
memory 2
6
Save and close
down
What you do
Dial the number of the
phone to be
programmed
Wait for it to auto-
answer
Enter *
Enter **0000
Enter *20
Enter *1 01 <number>
#
Enter *1 02 <number>
#
Enter *99
PHP400 Analogue Help Point.
What you hear
Notes
back
ringing
The number of rings
before auto-answer is
programmable (see
below), but is factory
A single tone
set to 5
(beep), then
ringing resumes
Ringing stops
If you still hear
ringing, either the
phone hasn't auto-
answered yet, or it
didn't hear the *. Wait
a second and try
again.
No response
If you don't hear 6
tones in response to
*20, it means the PIN
6 tones
was not recognised.
Enter *# and try
again.
A single tone
If you make a
mistake, or hear 2
tones instead of one,
A single tone
just repeat the
command.
A single tone
The final tone
confirms that the
changes have been
saved.
11