iGuard iGuardStove Manual de usuario y funciones en línea - Página 7
Navegue en línea o descargue pdf Manual de usuario y funciones en línea para Estufa iGuard iGuardStove. iGuard iGuardStove 16 páginas. For electric, gas & cooktop stoves

Operating the iGuardStove Gas Stove Model
1. POWER
When the iGuardStove is installed it is powered all the time. It draws only 5 watts of power while in
the standby mode so you will not need to shut it off.
iGuardStove will wake up and the screen will come on when it senses you are in the area. If you are
simply coming into the kitchen for other reasons then it will work as a motion controlled night light.
2. START COOKING
To start cooking FIRST go to the iGuardStove and follow the
onscreen instructions. Press the left button labelled " START " which will
open the gas valve and allows the gas to flow when you turn the stove
knob to ignite the burner. The internal count down timer is hidden and
when the iGuardStove starts the screen will say " Protection Enabled" for 5 seconds and then screen
will change to read " When Done, Press STOP and turn off the stove "
3. AUTOMATIC STOVE SHUT OFF
Your stove operates as it always did. The iGuardStove starts to count down when it doesn't see you
in the sensor range (approximately 10-12 feet or 3-4m) and will shut off after the 5 minutes times
out. (See Page 7 & 13 to change the 5 minutes to other times).
4. RESUME COOKING
Upon returning to the kitchen AFTER the iGuardStove has shut off the
Stove automatically the screen instruction will say, " Press RESUME
then relight stove ". Press the left button labelled " RESUME "
which will re-open the gas valve and then use the stove's knobs to
re-ignite the burner again. After 5 seconds the onscreen display will change and the
the button label will read " Press Stop and shut off the stove ".
5. STOP COOKING
While you are cooking the on screen instructions will remind you with
" When Done, Press STOP and turn off stove ". This will shut off the
gas valve and the screen will then switch back to the " START " mode
and will remain there until the next time you decide to cook. Pressing
the " Emergency " button will instantly shut the stove off. (To resume cooking press " Reset ".
6. MANUAL TIMER (Note: This doesn't rely on the motion sensor)
This timer allows both the oven and stovetop to be used uninterrupted for
longer cooking times than the Automatic Shut Off of 5 minutes.
Press the middle button labeled " Manual " in order to set the time.
When in Manual timer mode use the % & arrows to set the hours and
minutes that you want to have the stove or oven operate. The manual timer will start to count down
without pushing any other buttons. After the Manual timer times out
the screen instruction will display " Timed Out Press Reset ". Press
"Reset" to put the iGuardStove back to Standby. If you don't want
someone to have the ability to override the safety feature by Using
the Manual Timer then you can simply disable the Manual Timer and it will disappear from the
screen.
Important Note:
The Manual Timer has the same effect as disabling the Auto Shut Off feature so be careful with its
use as there is no active safety feature.
In Standby/Sleep the screen is dark.
To Register or Open your new account go to
screen example below. Just fill in the information and then choose "Register" at the bottom.
When adding a Phone Number use your cell phone if you want to get text alerts. Otherwise leave it
blank. You can add it later.
Sign In After Account is Open
After your account has been created sign in using your newly created log in information. Check the
"Remember Me" box and then click "Sign In". Once you arrive at the Home page don't forget to
bookmark that page and then every time you go to the bookmark you will go directly to the Home
page without having to Login.
7
Online Features
Register a New Account
https://manage.iguardfire.com
where you will see this