DynaGen ES53 Manual de instalación y uso - Página 4

Navegue en línea o descargue pdf Manual de instalación y uso para Unidad de control DynaGen ES53. DynaGen ES53 18 páginas. Control module

The ES53 Control Module is a combined "engine controller + time delay module." It is typically

mounted at the engine, to minimize runs of heavy current carrying wiring. With #22 gauge wire,

the distance between engine and transfer switch can be up to 400 feet. Standard cable length

supplied with the package is 50', and other lengths are available in 25' increments. The cable has

the connector terminals pre-mounted on one end, but the engine end must be field installed.

Please refer to the AST3225 Manual for system wiring diagrams with the control module and

transfer switch.

• Differential speed sensing inputs (for twisted-pair connection): Very effective interference

prevention by means of noise cancellation.

• Excellent EMI handling: Software detection of, and recovery from, noise corruption.

• REPLACEABLE RELAYS; Replaceable relays provided within on board sockets. Relays

Rated 20 Amps at 30 VDC

• REPLACEABLE FUSE; On board replaceable 20A fuse, mini-fuse (standard automotive

type).

• Reversed supply protection; No requirement for series diode on supply.

• 3.3V to 30V, -40ºc. to +85ºc. operation: Works anywhere, anytime .

• Zero Speed Restart

starter is possible unless the speed is zero.

• Oil Bypass Failure: Waits 15 seconds from start for 1-3 crank tries, and 20 seconds for more

than 3 crank tries, before enabling Low Oil pressure monitoring. Requires no user setting.

SMALL SIZE; 3.302" x 3.342" x 1.842" 0.67lbs

•

Installation and User Manual for the ES53 Control Module

INTRODUCTION



: Prevents starter pinion wear by ensuring that no engagement of the