Greatneck 80134 Instrucciones de funcionamiento y manual de piezas - Página 3
Navegue en línea o descargue pdf Instrucciones de funcionamiento y manual de piezas para Herramienta eléctrica Greatneck 80134. Greatneck 80134 8 páginas.
Imprimir página
Operating Instructions and Parts Manual
WARNING
•
Disconnect the plug from the power source before
making any adjustments, changing accessories or
storing the tool.
•
To avoid electrical hazards, fire hazards or damage
to the rotary tool, use proper circuit protection.
•
Do not abuse the cord. Never use the cord to carry
the tools or pull the plug from an outlet. Keep cord
away from heat, oil, sharp edges or moving parts.
Replace damaged cords immediately.
NOTE: The manufacturer declines any and all
responsibility for damage to vehicles or components if
said damage is the result of unskillful handling by the
operator or of failure to observe the basic safety rules
set forth in the instruction manual.
WARNING
Read Rules for Safe Operation and Instructions
Carefully.
Important Safety Instructions
The warnings, precautions, and instructions discussed
in this manual cannot cover all possible conditions
and situations that may occur. The operator must
understand that common sense and caution are
factors which cannot be built into this product, but
must be supplied by the operator.
WARNING
1. Use only accessories recommended or sold
by manufacturer. Use of non-recommended
accessories may result in fire, electric shock or
injury.
2. Do not disassemble the Rotary Tool. Take it to a
qualified professional when service or repair is
required.
3. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gasses or dust. Power tools
create sparks which may ignite the dust or fumes.
4. Only use accessories which are specifically
designed for use with a Rotary Tool.
5. Wear approved safety eye/face shield, ear
defenders and hand protection.
6. When not in use, disconnect from the power
source and store in a safe, dry childproof location.
06/15
2015 GREATNECK
7. Avoid body contact with grounded surfaces such
as pipes, radiators, ranges and refrigerators.
8. When operating a power tool outside, use an
outdoor extension cord marked "W-A" or "W".
9. DO NOT use this Rotary Tool for tasks it is not
designed to perform.
10. DO NOT abuse the cord. Never use the cord to
carry the tool or pull the plug from an outlet.
11. DO NOT operate the Rotary Tool if you are
tired or under the influence of alcohol, drugs or
intoxicating medication.
12. DO NOT expose power tools to rain or wet
conditions.
13. DO NOT use the Rotary Tool if the switch does not
turn it ON or OFF.
DISPOSAL
At the end of the useful life of the GreatNeck Rotary
Tool, dispose of the components according to all state,
federal, and local regulations.
PURPOSE
The GreatNeck Rotary Tool with 35 Piece Accessory
Kit polishes, grinds, cuts, shapes and sands metals
and is great for home hobbyists or garage machinists
whether professional or novice. All tools needed are
at hand and it accepts all standard accessories and
attachments.
PRODUCT SPECIFICATIONS
Voltage:
Input Power:
No-Load Speed:
Collet Capacity:
Spindle Lock:
Cable Length:
Certificate:
3
80134
ROTARY TOOL
120V/60Hz
1.2 AMP
10,000-35,000 RPM
1/8"- 3/32"
Yes
6 Feet
c-UL-us