Automation Correct Coal-trol Digital TS2BL Manual de inicio rápido

Navegue en línea o descargue pdf Manual de inicio rápido para Termostato Automation Correct Coal-trol Digital TS2BL. Automation Correct Coal-trol Digital TS2BL 2 páginas.

Automation Correct Coal-trol Digital TS2BL Manual de inicio rápido
Coal-trol Digital™ TS2BL Limited Warranty
THREE-YEAR WARRANTY - Automation Correct LLC (us) warrants the TS2BL Thermostat and Control
Module to be free from defects in material and workmanship. If a defect is found within three years from the
date of original installation of the product (whether or not actual use begins on that date) Automation Correct
LLC will provide a new or remanufactured part, at our sole option, to replace any defective part, without
charge for the part itself.
This warranty does not include labor or other costs incurred for diagnosing, repairing, removing, installing,
shipping, servicing or handling of either defective parts or replacement parts.
Warranty Conditions:
1. Warranties only apply to products in their original installation location.
2. Installation, use, care, and maintenance must be normal and in accordance with the instructions
contained in the Operation Manual, Installation Manual and Automation Correct LLC's Service
Information.
3. Defective parts must be returned to us or an authorized dealer for credit.
4. All work is performed during normal business hours.
5. This warranty applies only to residential use.
LIMITATIONS OF WARRANTIES - All implied warranties (including implied warranties of merchantability
and fitness for a particular purpose) are hereby limited in duration to the period for which the LIMITED
WARRANTY is given and applies. Some states do not allow limitations on how long an implied warranty
lasts, so the above may not apply to you. The expressed warranties made in this warranty are exclusive and
may not be altered, enlarged, or changed by any distributor, dealer, or other person whatsoever.
Automation Correct LLC will not be responsible for:
1. Damage or repairs as a consequence of faulty installation, misapplication, abuse, improper servicing,
unauthorized alteration or improper operation.
2. Failure to operate due to voltage conditions, blown fuses, open circuit breakers or other conditions
beyond the control of Automation Correct LLC.
3. Parts not supplied or designated by us, or damages resulting from their use.
4. Automation Correct LLC products installed outside the 50 US states or Canada.
5. Cost of heating fuel of any kind whatsoever including electricity.
6. Any special indirect or consequential property or commercial damage of any nature whatsoever. Some
states do not allow the exclusion of incidental or consequential damages, so the above limitation may not
apply to you.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
MADE IN USA
www.automationcorrect.com
Introduction
The TS2BL thermostat is an important
part of a Coal-trol Digital control system.
This thermostat is compatible with all
"CM" type control modules and is a direct
replacement for TS2 type thermostats.
The vast majority of forced air automatic
coal stoker stoves will work with the
TS2BL and the Coal-trol Digital system.
As shipped, no setup is needed for users
of Leisure Line and Hitzer brand stoker
stoves.
If you are using a Coal-trol Digital system on a Keystoker, Alaska, Reading,
Harman, or other brand of automatic stoker stove you will need to adjust
your IDLE, MAX, and possibly other settings. The recommended settings are
detailed in the Recommended Settings by Stove Brand section in the full
user manual available at www.automationcorrect.com.
The TS2BL is initially configured for Single Setpoint Mode [SSP]. Information
to configure it for two setback mode i.e. TS2, or multi-setback mode i.e.
TS2ES is explained in the full TS2BL manual.
ATTENTION - Please follow all manufacturer instructions that came
with your stove or furnace. The Coal-trol Digital is designed to
complement and enhance the safe operation of your appliance.
Specifically, the Coal-trol Digital control system has been designed for
use with appliances tested to ANSI Standard Designation: E1509-95,
Standard Specification for Room Heaters, Pellet Fuel-Burning Type
and/or UL1482, Room Heaters, Solid Fuel Type.
Syracuse • NY