Dynalink RTA770 Manual de configuración rápida - Página 12

Navegue en línea o descargue pdf Manual de configuración rápida para Enrutador de red Dynalink RTA770. Dynalink RTA770 16 páginas. Adsl router/modem

Imprimir página
ADSL Router Quick Set-up Guide
Don't:
Enable any form of remote access to the router unless you are confident in
handling the security implications. Beware that an attacker may compromise
the router and attempt to exploit the system without your knowledge. Remote
administration of the router opens up the opportunity to breach the security
of your router and network. Use the built in access control list to restrict
access to only authorised Internet hosts.
Enable IP extension bridging without firewall protection. If the router operating
in this mode is connected to a computer, to the minimum use a "personal
firewall" (software) to protect the computer.
Send your router away for repair or replacement without resetting to factory
default, or wiping out your Internet account login details. Use the Backup
Configuration option to store your router's setting elsewhere. This function
can be found in the router's Management > Backup Config menu. When a
replacement unit is received, restore the original setting from the backup file.
9

Indicator lights

There are 8 indicators on the front panel. Every time the router is powered on or
reset, the DIAG light will come on indicating self-test is in progress.
INDICATOR
PWR
DIAG
LAN1 - LAN4
USB
DSL
STATUS
DESCRIPTION
Off
Power off.
Solid
Power on.
Off
Power off, or initial self-test OK.
Flashing
Firmware uploading or updating.
Solid
Initial self-test failed. The unit is faulty.
Off
Power off, or no Ethernet link is present.
Flashing
Data are going through the Ethernet port.
Solid
The Ethernet link is ready.
Off
Power off, or no link to USB port.
Flashing
Data are going through the USB port.
Solid
The USB link is ready.
Off
Power off, or ADSL line training is in progress.
Flashing
Data are going through the ADSL link.
Solid
ADSL link is ready.