Agrimate AMTH-PRO-K-2S Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Césped y jardinería Agrimate AMTH-PRO-K-2S. Agrimate AMTH-PRO-K-2S 20 páginas.

Imprimir página

IV. Notes before operation

Before operation, please make inspection and necessary adjustment and apply for repair

in case of abnormalities. If there are any abnormalities, please repair the machine in the

authorized store.

2. Inspection before operation

Location

Appearance

Fasteners

Gearbox

Blades

Air filter

Oil tank

Throttle Switch

Gasoline engine switch

Nut handle

V. Notes during operation

nspection of fuel must use the mixture of 92# ordinary gasoline and 2-stroke machine oil.

The mixing ratio shall be correct. At the first 20 hours, 92# gasoline: 2-stroke machine oil =

20:1 (by volume ), and then change into 25:1.

The gasoline engine can't suddenly stop. The speed has been adjusted to 2300~2700

round/min. Don't change it freely.

Every hour the blades worked, it should be oiled with HG-10# lubricating oil. The space

between the blades should be adjusted correctly.

Every 8~10 hours fill the gearbox with ZFG-2 lubricating oil once a time.

Avoid great impacts when moving the machine.

This machine can not be used as cropper.

When the gasoline engine is working, don't touch the blades even when the clutch is apart.

Check content

Wearing-out or loosing

Loosing

Sufficient grease

Rounding, breaking or deformation

of blades

Lubricating of blades

Contamination

Sufficient fuel and loosing of tank

cover

Smooth operation

Proper on/off operation

Proper adjustment of gap between

blades

Proper fixation of handle

Correction

Reinforcing

Replenishing every

20 to 30 hours

Replacing the components

Lubricating

Cleaning

Replenishing or reinforcing

Adjusting or replacing

components

Replacing components

Adjusting