ADEMCO LYNX Manual del sistema - Página 9
Navegue en línea o descargue pdf Manual del sistema para Sensores de seguridad ADEMCO LYNX. ADEMCO LYNX 14 páginas.
También para ADEMCO LYNX: Manual del usuario (17 páginas), Manual de inicio rápido (8 páginas)
Imprimir página
Ademco Lynx System Manual
5. Day (The current day of the month will display.)
Enter the 2-digit day of the month (i.e., 01-31).
Press [*] to accept the entry and continue to the year setting.
Press [#] to return to the month setting.
6. Year (The current year will display.)
Enter the last two digits of the year (i.e., 00-99).
Press [*] to accept the entry and exit Clock-Setting mode (keypad beeps 4 times).
Press [#] to return to the day setting.
Message Recording/Playback/Volume Control
The ADT Ademco Lynx Security System Message Center allows you to record, play and delete messages.
The maximum message duration is 85 seconds.
NOTES:
1. The Record/playback functions can only be performed from the master keypad. It cannot be
performed from any other wireless keypad.
2. If the system loses electrical power, all messages will be erased.
3. Message Play/Record will not be available if a report must be sent.
4. Individual messages cannot be played back or deleted.
Recording a Message
To record a message:
1. Press [FUNCTION] + [RECORD].
2. The keypad displays "REC MESSAGE." Begin speaking into the microphone.
3. The recording will automatically stop after 85 seconds, if a message has been recorded. The keypad
will beep twice and "REC" will no longer be displayed. "MESSAGE" will still be displayed.
4. To stop recording before the end of 85 seconds, press [OFF].
5. The keypad beeps twice, the REC display turns off, but the MESSAGE display remains on.
6. Additional messages can be recorded, as long as there is recording time remaning, by repeating the
above steps.
NOTE: If you are trying to record a new message and the message center is already full, the
http://alpha.adt.com/help/261[11/14/2018 8:02:22 PM]