HID Signo 25B Manual de instalación - Página 2

Navegue en línea o descargue pdf Manual de instalación para Controladores de acceso IP HID Signo 25B. HID Signo 25B 2 páginas. Biometric reader/controller
También para HID Signo 25B: Manual de instalación (2 páginas), Manual del usuario (18 páginas)

Imprimir página

Specifications

Current

Input

Voltage

Standby

AVG

12 VDC

800 mA

Standby AVG - Root Mean Square current draw without a card in the RF field.

Maximum AVG - Root Mean Square current draw during continuous card reads. Not evaluated by

UL.

Peak - highest instantaneous current draw during RF communication.

Regulatory

Connect only to a Listed Access Control / Burglary LPS power supply. These

readers are intended to be used with listed (UL294) control equipment. Suitable for

outdoor use.

Only Wiegand and Bluetooth communications have been evaluated by UL.

The Open Collector Output has not been evaluated by UL.

RS485 communications has not been evaluated by UL.

Inputs (reserved for future use) have not been evaluated by UL.

The Ethernet connection is for supplemental use; the unit is connected to an Access

Control Panel.

The Signo 25B Biometric Reader is compatible with HID Mobile Access® version

3.3.1 and later using mobile devices with BLE version 4.2 and later listed at:

https://www.hidglobal.com/mobile-access-compatible-devices

Install in accordance with NFPA70 (NEC) Local Codes, Canadian Electrical Code

CSA 22.1, and authorities having jurisdiction. Follow all National and Local Codes.

UL 294 Performance Levels

Access

Destructive

Control Line

Model #

Attack

Security

Level

25B

Level I

CE Marking

HID Global hereby declares that these proximity readers are in compliance with the

essential requirements and other relevant provisions of Directive 2014/53/EU.

Por el presente, HID Global declara que estos lectores de proximidad cumplen con

los requisitos esenciales y otras disposiciones relevantes de la Directiva 2014/53/

EU.

HID Global déclare par la présente que ces lecteurs à proximité sont conformes

aux exigences essentielles et aux autres stipulations pertinentes de la Directive

2014/53/EU.

A HID Global, por meio deste, declara que estes leitores de proximidade estão em

conformidade com as exigências essenciais e outras condições da diretiva 2014/53/

EU.

HID Global bestätigt hiermit, dass die Leser die wesentlichen Anforderungen und

anderen relevanten Bestimmungen der Richtlinie 2014/53/EU erfüllen.

HID Global dichiara che i lettori di prossimità sono conformi ai requisiti essenziali e

ad altre misure rilevanti come previsto dalla Direttiva europea 2014/53/EU.

Download copies of the Radio Equipment Directive (RED) Declaration of

Conformity (DoC) at: http://www.hidglobal.com/certifications.

To ensure that RF exposure levels remain at or below the tested levels, a minimum

safe separation distance of 10 mm between the user and the reader is required for

RF exposure compliance.

Canada Radio Certification

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux

appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions

suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de

l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d'en compromettre le fonctionnement.

Powering

Trusted Identities

Americas & Corporate

611 Center Ridge Drive

Austin, TX 78758

USA

Support:

866-607-7339

Fax:

949-732-2120

hi dg l ob a l .com

Operating Temperature

Max

Peak

AVG

-4° F to 150° F

1.5 A

2 A

(-20° C to 66° C)

Stand-by

Endurance

Power

Level

Level IV

Level I

Asia Pacific

19/F 625 King's Road

North Point, Island East

Hong Kong

Support:

852-3160-9833

Fax:

852-3160-4809

E4662

FCC

This device complies with part 15, subpart C, of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation. These limits are designed to provide

reasonable protection against harmful interference. This equipment generate,

uses and can radiate RF energy and if not installed and used in accordance with

instruction, may cause harmful interference. Possible solution include: relocate

the device, increase separation between equipment, power equipment separately,

consult with your dealer.

CAUTION: Any changes or modifications to this device not explicitly approved by

HID Global could void your authority to operate this equipment.

Taiwan

根據NCC低功率電波輻射性電機管理辦法規定:

第十二條

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變

更頻率、加

大功率或變更原設計之特性及功能。

第十四條

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象

時，應立即停

用，並改善至無干擾時方得繼續使用。

前項合法通信，指依電信法規定作業之無線電通信。

低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之

干擾。

South Africa

TA-2019/920

APPROVED

UAE

TRA

REGISTERED NO:

ER72356/19

DEALER NO:

DA37204/14

Conditions

Singapore

Complies with

IMDA Standards

DA103548

Brazil

Este equipamento não tem direito à proteção contra interferência prejudicial e não

pode causar interferência em sistemas devidamente autorizados.

Europe, Middle East & Africa

3 Cae Gwrydd

Green Meadow Springs

Cardiff

CF15 7AB

United Kingdom

Phone: +44(0) 2920 528 500

Equipment

8T2 9

ACC Control READER

An ASSA ABLOY Group brand

Australia and New Zealand

E4662

Brazil

Condomínio Business Center

Av. Ermano Marchetti, 1435

Galpão A2 - CEP 05038-001

Lapa - São Paulo / SP

Brazil

Phone: +55 11 5514-7100

General Signaling

Equipment

ABCD12345678

PLT-04026 Rev. B.1