Automation Dr. Nix QNix 1500 Manual de instrucciones - Página 4
Navegue en línea o descargue pdf Manual de instrucciones para Instrumentos de medida Automation Dr. Nix QNix 1500. Automation Dr. Nix QNix 1500 12 páginas. Coating thickness gauge
Imprimir página
While there is a value visible on the display, push both slides
simultaneously forward and hold for more than one second.
The reading will change to the other dimension.
Gauges with memory can be switched from μm to mil using
the optionally available software.
Resolution
0.1 μm in the range of 0.0 – 99.9 μm
1
μm in the range of 100 – 999 μm
0.01 mm in the range of 1.00 – 5.00 mm
Or
0.01 mil in the range of 0.00 – 9.99 mil
0.1 mil in the range of 10.0 – 99.9 mil
1
mil in the range of 100 – 200 mil
Temperature Range
0 °C - 50 °C or 32 °F - 122 °F
Operating and Changing of Battery
The gauge is powered by a 9V alkaline battery. The battery is
located at the wide end of the gauge. If the blinking sign "BAT"
appears on the display, it is advisable to change the battery,
but it is still possible to measure for some time. Memorized
data will remain stored, even while changing batteries.
Empty batteries should be disposed separately. If possible,
use the special services provided by your council.
Adjustment and User Information
A new zero-adjustment is required when using the gauge for
the first time, working with different materials, after inserting a
new battery, or from time to time.
Place the respective probe of the QNix® 1500 on one of the
zero plates enclosed in the case. For measurements on
ferrous substrates use the steel zero plate, for non-ferrous
applications the aluminum plate or a respective uncoated
substrate.
4