Automation Dr. Nix QNix 9500 Series Manual de inicio rápido - Página 13
Navegue en línea o descargue pdf Manual de inicio rápido para Instrumentos de medida Automation Dr. Nix QNix 9500 Series. Automation Dr. Nix QNix 9500 Series 16 páginas.
Imprimir página
Insert the probe in the probe holder
•
Push the probe into the probe holder using a slight turn/push movement.
The arrow on the probe and on the probe holder must align. When aligned correctly,
all 4 lugs will lock into the respective groove on the probe.
•
Reinsert the probe holder or plug the probe into the cable and screw in place.
•
To lock the probe put it in place and turn clockwise until it locks.
The arrow on the probe holder points at the locked padlock on the probe input.
Connect the probe to the probe cable
•
Screw the probes together with the cable. For this purpose, always turn only the union nut
of the cable. A turning movement of the angled cable connection can lead to permanent
damage of the electrical contacts. This entails the loss of guarantee.
•
For better probe guidance, insert the probe into the probe holder of the gauge.
The gauge is now ready for use. To remove a probe, follow the above steps in reverse order.
Probe cable
Probe
Probe holder
13