Hide-A-Hose HPHS5000W Manual de instalación - Página 12

Navegue en línea o descargue pdf Manual de instalación para Unidad de control Hide-A-Hose HPHS5000W. Hide-A-Hose HPHS5000W 13 páginas.

Retrofit an Existing Home

Use the mud cover as a template

Push the bottom two pointed

tabs into the sheetrock. The top

pointed tab can be bent down

as you pull the top of the frame

into the hole. The tabs will help

hold the frame in place while you

install the valve. You may need to

push a couple of small finish nails,

horizontally into the sheetrock,

through the holes located on the

side of the frame.

Installation of pipe runs and trim

can follow same instructions as for

new construction.

- 10 -

to cut the hole.

Finish

To allow the frame to ﬁt through

the valve hole in the sheetrock,

cut approximately 3/4" (1.9 cm)

off the forks.

You will need to score and cut

off both of the mounting tabs in

order for the rough-in frame to fit

in the hole.

Insert the Rough-in frame

horizontally. Then turn it back

upright behind the wall.

nail

Pointed

tabs

HS5000 INSTALLATION GUIDE

Finish

nail