Celestron FirstScope 70 AZ Manual de instrucciones - Página 3
Navegue en línea o descargue pdf Manual de instrucciones para Telescopio Celestron FirstScope 70 AZ. Celestron FirstScope 70 AZ 15 páginas. Refractors
También para Celestron FirstScope 70 AZ: Manual de instrucciones (14 páginas), Manual de instrucciones (11 páginas)
Imprimir página
- 1. Y O U R T E L E S C O P E
- 2. Adjusting the Tripod Height
- 3. Attaching the Telescope to the Mount
- 4. The Eyepieces
- 5. Aligning the Finder
- 6. Calculating Magnification
- 7. Your First Look
- 8. Daytime Observing
- 9. Observing Deep-Sky Objects
- 10. Maintenance
- 11. Care and Cleaning of the Optics
- 12. Storing Your Telescope
- 13. Technical Specifications
- 14. Optional Accessories
F I R S T S C O P E
The Firstscope AZ fully assembled.
iarize yourself with the various parts of your Firstscope AZ telescope.
Adjusting the Tripod
Height
Figure 2-1
Use this illustration and others throughout this manual, to famil-
3. Attach the accessory tray to the leg braces.
With the tripod set up, you can adjust the height of the tripod. To do this:
1. Loosen the wing nuts on the lower portion of the tripod leg.
2. Slide the center slat of the leg away from the tripod head until at the
desired height.
3. Tighten the wing nut (completely) to hold the leg firmly in place. A wrench
is provided to hold the bolt in place while you are turning the wing nut.
Repeat this process for each tripod leg.
A Z
3