Celestron NexStar 102GT Manual de configuración rápida - Página 2
Navegue en línea o descargue pdf Manual de configuración rápida para Telescopio Celestron NexStar 102GT. Celestron NexStar 102GT 4 páginas. Computerized telescope
Imprimir página
Quick Setup Guide
10. Secure optical tube to fork arm by tighten-
ing the screw located on the inside of the fork
arm assembly.
13. Insert the chrome barrel of the star diagonal
into the focuser and tighten the silver screw to
secure in place.
16. Slide Computerized Hand Control into
the holder as shown above.
19. While observing, tube should be positioned
as shown above.
Before you can begin observing, you must set up your Computerized
Hand Control, align your StarPointer finderscope and align your telescope.
Step by step instructions are included in the following Computerized Hand Control Guide.
www.CELESTRON.com
[cont.]
11. To attach the StarPointer finderscope,
loosen the silver screw and slide StarPointer
finderscope into mounting platform.
14. Select the low power (25 mm) eyepiece
and insert it as shown above. Tighten silver
screw to secure.
17. Plug Computerized Hand Control into the
port on the fork arm.
20. Before use, put 8 AA batteries (not in-
cluded) in the battery pack. Attach the battery
pack to the tripod by hanging the strap from
the tripod leg locking knob.
12. Secure StarPointer finderscope to mounting
platform by tightening the silver screw. The glass
window of the StarPointer finderscope should be
facing towards the front of the telescope.
15. Attach plastic hand control holder to the
tripod leg.
18. Before you begin viewing, please remember
to remove tube lens cap.
21. To turn on telescope, plug the battery pack
into the outlet on the base of the fork arm –
there is no on/off switch.