DB Drive OKUR A775.4 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Amplificador DB Drive OKUR A775.4. DB Drive OKUR A775.4 12 páginas.

OKUR +12V, GROUND, REMOTE CONNECTION DIAGRAM

3-4. SPEAKER CONNECTION

DB Drive recommendes to use minimum 12 gauge speaker connecting cables.

Run 12 gauge speaker connecting cables from your speakers to OKUR

amplifier's mounting location

Keep speaker cables away from power cables and OKUR amplifier's input cables.

Use grommets anywhere the cables have to pass through the holes in the metal frame or sheet metal.

Connect to the speakers according to the type of the terminals on each speaker.

Strip 3/8" of insulation from the end of each cable and twist the cables strands together

tightly. Make sure there are no stray strands that might touch other cables or terminals and cause

a short circuit.

Crimp spade lugs over the cable ends or tin the ends with solder to provide a secure termination.

Connect the cable ends to Platinum series amplifiers as speaker system diagram

OKUR DIGITAL AMPLIFIERS' SPEAKER CONNECTION DIAGRAM 1.

CAUTION !!

A7750.1, A71100.1, A71500.1, A72000.1,

A72500.1 amplifiers

minimum impedance is 1 ohms.

Linked minimum impedance is 2 ohms.

Remote turn on

12V

BATTERY

Ground

8~ 1 ohms