DB Drive PRO2.6K Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Amplificador DB Drive PRO2.6K. DB Drive PRO2.6K 7 páginas. Proaudio series

IGNAL CONNECTIONS

Connect the RCA output of the head unit to the RCA input terminals of the

amplifier.

To make these connections, we recommend high quality RCA cables, which are available

at your local car audio retailer. Run signal wires away from electrical wires to avoid possibil-

ity of induced noise from the car's electrical system (i.e. popping noises or engine noise).

4 Channel Amplifier using

2 Pair of RCA Inputs.

Optional line out

connection to additional

amplifiers in the system.

94.7

Head Unit

PEAKER CONNECTIONS

(PRO2.6K, PRO3.6K)

Make the speaker connections using speaker wire that is at least 16

gauge or heavier.

As with any audio component, proper phasing of the amplifier and speakers is essential

for strong bass response. When connecting, make sure that positive (+) from the amplifier

is connected to the positive (+) of the speake

4 Ohm Speaker

(2 Ohm Minimum)

(Bridged)

The DB Drive amplifiers are capable of being bridged in a mono configuration. This

4 Ohm Speaker

r, and the same for negative (-).

PRO2.6K and PRO3.6K