AutomationDirect CLICK Dimensiones e instalación del producto - Página 2

Navegue en línea o descargue pdf Dimensiones e instalación del producto para Controlador AutomationDirect CLICK. AutomationDirect CLICK 4 páginas.

Imprimir página
Product Dimensions and Installation
Connecting the Modules
Together
CLICK PLCs, I/O modules and power
supplies connect together using the
extension ports that are located on the
side panels of the modules (no PLC back-
plane/base required).
1. Remove extension port covers and slide
the latch tabs forward.
2. Align the module pins and connection
plug, and press the I/O module
onto the right side of the PLC.
3. Slide the latch tabs backward to lock
the modules together.
Mounting
The CLICK PLC system, which includes the
CLICK power supplies, PLC units, and I/O
modules, can be mounted in one of two
ways.
1. DIN rail mounted
2. Surface mounted using the built-in
upper and lower mounting tabs.
Unit Dimensions
The dimensional drawings here and on
the next page show the outside dimen-
sions of the CLICK power supply, PLC,
and I/O modules. The CLICK PLC system
is designed to be mounted on standard
35mm DIN rail, or it can be surface
mounted.
Allow
proper
spacing
components within an enclosure.
Maximum system:
Power Supply + PLC + 8 I/O modules.
w w w . a u t o m a t i o n d i r e c t . c o m / c l i c k - p l c
Connecting Modules
Power Supply
Module
2.6
34.9
[0.102]
[1.37]
85
85
5
[3.35]
.35]
5
from
other
4
[0.16]
9.2
[0.36]
3
2
1
Supports up to eight I/O modules
DIN Rail Mounting
Pull tab
Push tab
down.
up until...
PLC Unit
I/O Module
53.5
27
[2.11]
[1.06]
"
For the latest prices, please check AutomationDirect.com.
Latch tabs
Surface Mounting
Mounting Tab
Click
Unit Dimensions
mm [inches]
13.5
[0.46]
75
[2.95]
9.4
[0.37]
tCLP-13
CLICK PLCs
Upper
Lower
Mounting Tab