AutomationDirect GS1 Series Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Controlador AutomationDirect GS1 Series. AutomationDirect GS1 Series 16 páginas.

Imprimir página
Appendix A: Accessories
A
P
ccessories
Art
With the exception of EMI filters, RF filters, and LR series line reactors, each accessory part number begins
with GS, followed by the AC Drive rating, and then the relevant accessory code. Following the accessory
code, you will find a description code when applicable. The diagram below shows the accessory part
numbering system.
GS - 22P0 - LR - 3PH
L
r
iNe
eActors
Input line reactors protect the AC drive from transient overvoltage conditions typically caused by utility
capacitor switching. Input line reactors also reduce the harmonics associated with AC drives, and are
recommended for all installations.
Output line (load) reactors protect the motor insulation against AC drive short circuits and IGBT reflective
wave damage, and also allow the motor to run cooler by "smoothing" the motor current waveform. They
are recommended for operating "non-inverter-duty" motors, and for any motors when the length of wiring
between the AC drive and motor exceeds 75 feet.
There are two types of AutomationDirect line reactors that can be used with GS1 AC Drives; the original GS
series reactors (legacy) and the newer LR series reactors.
LR series reactors have universal mounting feet with multiple mounting slots, and they can replace most
reactors using the existing mounting holes. Use four bolts to mount the reactors to the mounting panel.
Page A–2
N
umberiNg
Description Code (optional)
1PH: Single phase 3PH: Three phase
Blank: For reactor, blank = 3-phase
Accessory Code
BR: Braking resistor
DBU: Dynamic Brake Unit
FB: Feedback board
FUSE: Replacement fuses for FKIT
LR: Line reactor (legacy)
Horsepower Rating
Example: 2P0 = 2.0 hp
Voltage Rating
1: 115V
2: 230V
4: 460V
Series
GS: All GS and DURApulse Series Drives
GS1: GS1 Series
GS2: GS2 Series
GS3: DURApulse Series
LR: Newer line reactor series
GS1 Series AC Drives User Manual – 3rd Edition – 11/09/2018
ENC: Enclosure
BZL: Bezel
CBL: Cable
EDRV: Ethernet board
FKIT: Fuse Kit
KPD: Keypad
RS: Recommended Standard
7P5 = 7.5 hp
010 = 10 hp
5: 575V