DynaMetric TMP-636S Instrucciones

Navegue en línea o descargue pdf Instrucciones para Instrumentos de medida DynaMetric TMP-636S. DynaMetric TMP-636S 4 páginas. Telephone transmit & receive patch

Imprimir página

The TMP-636S Telephone Transmit & Receive Patch allows you to record and play back to

your telephone from your PC sound card or tape recorder. Compatible with carbon and

electret mics. It allows you to switch sound card operation between the phone and speakers

or headphones.

• Record telephone conversations

• Record just your voice through your sound card (i.e. memos, repetitive, canned

announcements...)

• Playback from your sound card over the phone (announcements, music, phone

conversations, etc.) or on your PC speakers or headphones

Installation is easy, and operation is simple. The TMP-636S is compatible with analog and

digital phones, and standard sound cards and tape recorders. You can leave it connected to

your phone since it does not interfere with normal telephone operation. Will not record

speakerphone.

Install the TMP-636S according to the instructions below and operate your sound card

controls as usual. Note: Make sure the "Monitor" switch on your sound card software (if any)

is set to OFF to avoid feedback. Playback can be heard in your earphone and on the other

end of the call with the switch in the 'PHONE' position, or on your PC speakers or

headphones in the 'SPEAKER' position.

To Install: (See diagram)

Unplug handset (or headset) coil cord from the base of the telephone, and plug the short

modular cord from TMP-636S in its place.

Plug the handset coil cord into the modular jack on the TMP-636S.

Unplug the PC speaker or headphones from the sound card, and plug in the 3.5mm

stereo plug on long GREEN cord from the TMP-636S in its place in the speaker or

headphone jack on the sound card or tape recorder.

Plug the 3.5mm mono plug on the long PINK cord from the TMP-636S into the MIC jack

on the sound card or tape recorder.

Plug the PC speakers or headphones into the jack on the TMP-636S.

FOR LEGAL USE ONLY

www.DynaMetric.com

INSTRUCTIONS

TMP-636S Telephone Transmit & Receive Patch

For Use with Sound Card with PC Speakers

P/N 44201

Page 1 of 4

6-10-05