Dynamic DT1200 Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Equipos de control de insectos Dynamic DT1200. Dynamic DT1200 3 páginas. Flying insect trap

Imprimir página

OWNER'S MANUAL

FLYING INSECT TRAP

MODEL: DTl 200

Thank you for purchasing the

DYNATRAP® flying insect trap!

IMPORTANT SAFETY INSTRUCTIONS

WARNING, When using electric appliances, basic precautions should always be followed, including the

following:

- To disconnect,

turn

all controls lo the off ("O") position, then remove plug from outlet.

- Unplug from outlet when not

use and before servicing or cleaning.

- To reduce the risk of electrical shock, do not put appliance

water or other liquid.

- This appliance

provided with double

insulation.

Use only

identical

replacement parts.

- Connect only to a circuit that

prolected by a ground-fault circuil-interrupter (GFCI).

See instructions for Servicing of Double-Insulated Appliances.

INSTRUCTIONS FOR DOUBLE-INSULATED, CORD-CONNECTED APPLIANCES:

In a double-insulated appliance, two systems of insulation ore provided instead of grounding. No

grounding

means is provided

on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing of a double-insulated

appliance requires extreme core and knowledge of the system, and should be done only by qualified service personnel.

Replacement ports for a double-insulated appliance must be identical to !hose ports in the appliance.

IMPORTANT SAFETY INSTRUCTIONS

Please read these

instructions

before using the DYNATRAP® Insect Trap and keep for future reference.

l. Always turn unit off and disconnect plug before servicing, cleaning, or changing

bulb.

2. Do no! position the unit near heat, gas, oil or other flammable materials.

3. Place product oul of reach from children.

4. Never operate !his product if it hos

damaged cord or plug, ii

is not working properly, ii

has been dropped or

damaged, or if

hos been dropped into water.

5. This product is equipped with 2-conductor cord and 2-prong polarized plug as a safely feature. This plug will fit in a

polarized outlet only one way. If !he plug does not fully fit in the outlet, then reverse the plug. If it s1ill does no! lit,

then contact a qualified

electrician.

To reduce the risk of electrical shock, only plug into a properly installed outlet.

Do no! attempt to defeat this safely fealure.

6. Do not insert fingers or any foreign objects into the unit while

is connected to an electrical outlet.

7. Collected insects within the unit may contribute to fire, so clean insects from the unit frequent~.

8. Do no! clean this product with water spray. Do no! place where it con foll into water, or near flammable materials.

9. Do not touch fan while in motion.

l 0. Do not abuse cord--never carry or hang

unit

by cord or yank it ta disconnect from receptacle. Keep cord away from heat,

oil, or sharp edges.

11. Extension cords used with this product must be marked with suffix letters "W-A" and with a tag slating "Suitable for Use

with Outdoor Appliances".

12. Use only extension cords that have plug and receptacles that match the product plug. Replace or repair damaged cords.

INSTALLATION & OPERATING INSTRUCTIONS

Unpack unit. Save carton for off-season slorage (if

needed).

2. Pull the cord tight through the pole stand. Turn base on its side and insert bottom threaded plastic piece

into

hose, connecting to the lhreoded ploslic

cop.

Twist threaded ploslic cop clockwise to

tighten.

Complete

installation by aligning upper ond lower support tube and inserting the bar

sections.

(For more detailed

instructions, please refer to assembly guide)

Plug cord info an outdoor outlet or UL

lis!ed

exlension cord as described

"IMPORTANT SAFETY

INSTRUCTIONS". Turn power switch to "ON" position. The switch is located under the rain cover.

Small holes in the lid of the unit are designed lo collect rain waler outomaticol~ and fill the waler

troy.

If more water is needed, carefully fill troy¾ full using o small container (do not use water hose os it may

splash too much water

inside

the

trap).

Check once o week or os needed.

For bes! catch results leave unit on at all times, except when cleaning or

servicing.

Catch rote activity will be higher of night. For best catch results it

recommended to keep the unit

owoy

from competing light

sources.

Intended for household use

only.

7. It is recommended to place the unit of leas! 10 to 20 feet owoy from where people will be sitting.

This unit

all-weather resistant -designed for outdoor use including rainy

conditions.

CLEANING

Frequent cleaning will prolong the life of the unit, ensure lire prevention and provide for more efficient operation.

1. Be sure to clean the unit once per week

Switch the unit off and unplug before cleaning

For week~ cleaning, remove the screw securing the retaining cage and then !wist the cage

clockwise.

Remove the damper by grasping

the crossbar near the edge of the

damper.

Pull up

firm~.

Remove any buildup from the inside of the retaining cage and Ion with o brush

(included). Replace damper, snap firmly into

place.

For major cleaning, remove the lour screws securing the Ion housing to the light housing. After removing the screws, gently pull the Ion

housing owoy from the light housing. Using o soft brush, remove dirt and debris from the light

housing.

Once the cleaning process hos

been completed, align !he screw holes in the Ion housing with the screw holes in the lighting unit and tighten the screws to the hose of

the lighting

unit.

5. When replacing the retaining cage - DO NOT press/push against the screen windows.

REPLACING BULB

The light bulb life expectancy is approximately 3,000 hours (or about 4 months), and should be replaced regularly to ensure optimal UV

effectiveness. Even though the bulb's light may be visible to you, its ability to attract

insects

diminishes over

time.

Turn power switch to

"off"

position.

UNPLUG UNIT, and allow bulb to cool before

replacing.

Remove the screw securing the retaining cage and then remove the retaining cage by !wisting the cage

clockwise.

Turn !he unit upside

down.

Remove the four screws securing the Ion housing to the light

housing.

After removing the screws, gently pull the Ion housing owoy from

the light housing. Using

soft brush, remove dirt and debris from the light

housing.

Once the cleaning process hos been completed,

untighten the screw securing the hose of the light bulb to the light

housing.

Slide the metal bracket to the

side.

Cover the bulb with

cloth to protect your linger and

hand.

Grasp the bulb (with your hand and lingers protected by the cloth) and gently pull the bulb from

the socket.

Remove any debris from the lamp socket with a brush before inserting the new bulb. Replace !he metal plate over the base of the bulb

and tighten the retaining screw.

Align the screw holes in the Ion housing with the screw holes in the lighting unit and tighten the screws to the base of the

lighting unit.

Replace the retaining cage at the bottom of the unit.

Replacement fluorescent bulbs con be found of your local retailer or con be

ON/OFF SWITCH

ordered directly from

by visiting www.dynatrap.com

HOW THE DYNATRAP® INSECT TRAP WORKS

Flying insects ore attracted to the unit by UV light and CO2 that

is generated by the photo-catalysis between the UV lamps and

special Ti02

coating.

Additionally, small holes in the cover of the

unit allow rain water to fill the water troy, further attracting

mosquilos.

The fan then pulls the insects into the screened base,

trapping !hem until they dehydrate and die. The base can be

removed, allowing the contents to be periodically emptied into

the trash. The see-lhrough screen shows the insects !rapped in the

comportmenl, alerting you when the net needs to be

emplied.

TROUBLESHOOTING

Problem:

Possible cause:

Correction:

Bulb does no! illuminate

1. No electrical power.

1. Check plug and receptacle and fuse or circuit breaker.

and Ion does not spin.

2. Check to make sure power is switched to !he "on"

position.

Bulb illuminates, but fan

1. Shorted

fan.

1. UNPLUG

UNIT:

Examine fan lo see that it is free from

does not spin.

foreign material, dirt or build-up of dead insects. Clean unit as

in "CLEANING" section.

Fan spins, but bulb does

1. Bulb not seated

1. Check all sockets for proper bulb seating and alignment.

not illuminate.

properly.

2. Replace bulb if needed following instructions under "Replacing

Burnt out

bulb.

Bulb".

LIMITED WARRANTY

DWN,ft\lC.

warranties to the original purchaser that this product is free from defective materials and

workmanship. This warranty is limited to remedy any defective part for a period of one year from date of

original date of purchase. Retain your original receipt as proof of purchase. This warranty does not apply

to the light bulb, nor to, in our judgment, misuse or abuse. If this unit has been altered, no warranty is in

force. This warranty does not apply

this unit is purchased outside the United States, excluding Canada

and Mexico. In no case shall

-be liable for any accidental, punitive, consequential, or any other

damages of any kind for breach of this or any other warranty, expressed or implied, whatsoever. Some

states do not allow limitation on how long an implied warranty lasts, so the above limitation or exclusion

may not apply to you. This warranty gives you specific legal rights, and you may also have other rights

that vary from state to state.

PARTS

ACCESSORIES AVAILABLE

PART

DESCRIPTION

41050

7-Wall Replacement Fluorescent Bulb

piece)

41052

Fon Blade and DC Motor Ultra-Long Life Replacement

41053

Retaining Cage

41061

Lorge Capacity Net (lo be used instead of the Retaining Cage, suitable for extra large catch performance)

Dynamic Solutions Worldwide,

LLC

12247 W

Fairview Ave. Milwaukee, WI 53226

Phone: 414-431-2819

Toll free: 1-877-403-TRAP (8727)

Toll free fox: 877-403-3293

Email: [email protected]

Visit us online al www.dynolrop.com

Dynamic Solutions Worldwide, LL(

SAVE THESE INSTRUCTIONS

lntertek