Dynamic NXT MultiFit Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Silla de ruedas Dynamic NXT MultiFit. Dynamic NXT MultiFit 8 páginas. Head support

Imprimir página

that was set aside earlier in this step.

Note: The additional Latch Clamp Assembly that is provided

can be installed here instead of the original hardware if easier

FONCTIONNEMENT DE L'OPTION RABATTABLE

readjustment is desired.

Step /

Étape

Loosen Locking Handle

To loosen, turn the latch clamp between

½ - 1 full turn maximum. Raise the post extension

Step 1 – Loosen Latch Clamp

as far as possible.

Note: Once the post extension has been raised, hold onto the

To loosen, turn the latch clamp between ½ - 1 full turn

support arm and head pad to prevent it from falling forward.

maximum. Raise the post extension as far as possible.

Desserrer la poignée de verrouillage

Pour desserrer, tournez la pince de verrouillage

Note: Once the post extension has been raised, hold onto the

entre ½ et 1 tour maximum. Soulevez l'extension

support arm and head pad to prevent it from falling forward.

de poste aussi loin que possible.

Remarque : Une fois l'extension du poste levée, tenez le bras de

support et le coussin de tête pour l'empêcher de tomber.

Step /

Étape

Flip Back

/ Rebattable

The head pad can now be flipped back, away

from the user.

Note: Reverse the process to return the head support pad to

it's original position. Tighten the locking handle to prevent

any movement. The locking handle can be repositioned on

the screw once it I tightened by pulling out and turning.

Le coussin de tête peut maintenant être

retourné, loin de l'utilisateur.

Remarque : Inversez le processus pour ramener le coussin

de soutien de tête à sa position d'origine. Serrez la poignée

de verrouillage pour empêcher tout mouvement. La poignée

de verrouillage peut être repositionnée sur la vis une fois

qu'elle est serrée en tirant et tournant.

FLIP BACK OPERATION

Flip Back Operation

/ Desserrer la poignée de verrouillage

Step 2 - Loosen Latch Clamp

The head pad can now be flipped back, away from

the user.

Note: Reverse the process to return the head support pad

to it's original position. Tighten the latch clamp to prevent

any movement. The latch clamp can be repositioned on

the screw once it I tightened by pulling out and turning.

(Figure 7)

Last reinstall the head support ar

post extension, securing in place

that was set aside earlier in this st

Note: The additional Latch Clamp As

can be installed here instead of the ori

readjustment is desired.

Step 1 – Loosen Latch Clamp

To loosen, turn the latch clamp be

maximum. Raise the post extensi

Note: Once the post extension has bee

support arm and head pad to prevent

Flip