Gait up PhysiGait Lab Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Instrumentos de medida Gait up PhysiGait Lab. Gait up PhysiGait Lab 18 páginas. User manual and outcome parameters

Imprimir página

www.gaitup.com/support).



Copy trial recordings to your computer: Physilog® is not the best place to keep and save

important data. Gait Up cannot be hold responsible if data stored on the sensor are lost.



Physilog®5 can be used outside. Do not use Physilog®5 to measure water-sport

activities without additional waterproofing.



Storage: Store in a cool (0°C – 30°C) and dry place. The provided box is the perfect

place for your sensor.



Cleaning: Sensors can be cleaned gently using alcohol wipes. Before you clean the

device make sure it is turned off and disconnect all cables. Alcohol used in excess may

damage the sensor's waterproofing. Make sure to use wipes and not put liquid alcohol

directly on the sensor. Do not clean the USB entry with alcohol.



Each sensor is individually calibrated by Gait Up and they do not need yearly

recalibration for gait measurements.



Do not throw Physilog® sensors in the normal trash, dispose of it properly considering

local laws and rules about electronic waste and batteries. Contact Gait Up's customer

support for more information about elimination of Physilog®.



Make sure to know which Physilog® file corresponds to which trial for your analysis –

First digits of file name are automatically incremented (exceeding 999 and new date

resets the increment back to 1). Note that date of file generation (recorded between one

start and stop of the Physilog®) is visible in the XLS file and the Matlab structure "header".

If you wish to adapt internal date and time of the Physilog®, read the corresponding

section of the user manual of Physilog®5.



Do not remove the "conf.bin" file from the Physilog, otherwise it will create empty files

(no sensor activated). If this happens, recreate a configuration in the Research ToolKit

software or contact Gait Up's customer support. For firmware v1.1.0 upwards, a default

configuration based on original configuration is created to compensate the removal of

the conf.bin file and the "slave.txt" file is no longer needed.



Do not introduce pointy objects into the small hole besides the USB entry, this irreversibly

damages the waterproofing of the sensor.

PhysiGait Lab user manual v1.3.1 Date: 29.04.2019

EPFL Innovation Park, Bat C. CH-1015 Lausanne

Gait Up SA

www.gaitup.com

TVA CHE-145.136.760