Gait up PhysiRun Lab Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Instrumentos analíticos Gait up PhysiRun Lab. Gait up PhysiRun Lab 17 páginas.

—To start a measure press the bottom right button (Connected to Ready). When the watch

displays "Ready" the sensors start recording.

NOTE: You can check that the measure is started. Each sensor is blinking green

during recording.

—To start the chronometer, you can press the bottom right button of the watch again.

—To stop the measure, press the same button. The green blinking on the sensors stops

and your files are saved on each Physilog

3.2 Start a measure from the Physilog

The measure can be started directly from the Physilog

Material required:

• 2 Physilog

To start the measure hold the button for 3 seconds on each sensor. Check that there is a

green blinking on your two sensors after releasing the button.

WARNING: If you want a synchronization between your two sensors make sure

they are blinking green in the same time. Otherwise you need to check the

configuration "Radio mode" and "Radio channel" of your sensors with the

Research Toolkit (Windows version /Mac version, User guide), tab

"Configuration".

To stop the measure hold the button for 3 seconds, the sensor shines orange, then blinks

rapidly 3 times and stops. Check that the sensors stopped blinking. The file is

automatically saved on the device.

User guide PhysiRun Lab - v1.1.1 Date: 06.05.2019

EPFL Innovation Park, Bat C. CH-1015 Lausanne

✓

Gait Up SA

www.gaitup.com

TVA CHE-145.136.760