ADEMCO ALERT III Instrucciones de instalación - Página 2

Navegue en línea o descargue pdf Instrucciones de instalación para Alarma de humo ADEMCO ALERT III. ADEMCO ALERT III 2 páginas. Smoke detector/transmitter

ADEMCO ALERT III Instrucciones de instalación
+b@SWltlb#mounongpWOllO#lth#~~lOCd-pna)l)
on~l(seeOiegrem3).UsethetwosnewsandanChorsprwided.
6.~nnmtlmke-
emottmraamtbqg&mtmastolhws:Ali~
thedetector~lnatheolembyme~~s~llEentecposim~
detector with the %rnple" at the center of the mounting plate. Then tum
thedetectorinacloc~di~ion.soMetthaholdmg~sonthe
detector engage the loclring tabs on the mounting plate (see Disgrams 1
and 3).
TO MOUNTING
6. This cofwetes the haWaIii
of the No. 5706 Smoke DetectorlTrans-
miner. The installed unn should now be re-tested tar pmper operate as
outlined in FINAL TEST. For ad&tiinal intormstion (operation. testing
meintenence). see the instrucnms that accompany tt~
5700 Sys-
tern as well as those in the User~s Manual tor ths 5700 System.
NOTE OTHER SIDE FACES CEILING
OR WALL (THE WORDS
SLOITED HOLES
"SINGLE GANG" MUST FACE
AWAY FROM MOUNTING
SURFACE).
Dlagmm 3. MOUNTING PLATE FOR SMOKE DEJECTOR
The foUowing procedure temts the smoke Detector/Tfansmitter after
instabtioniscompbeted.ThbtatehouHdaobeprr(onnrd~e
Nwubmmb(atlmamtwamy)bytheumf.
l.&tHIO8pWllhUUTEStmo6*lhOCOlHdR
2PlWmorrnolu&WW#~bunoe8ndlnWhbIprrrunaell
tol
the
followinEj l3WWllWOtWWltS:
8. Within15seconds.thesmolredeteclorrwiUbegmitsaudibk,a~.
b. -Within 20 secmos thefeaner. me rirnoke eetector win oegin
wmmmwl9fdslmrdgnals(every12seconas)10memceiuercontrol
andthecrm~wiUem)twosoundseachti~a~isnrceived.
Thedetector'stransmitterlDwillelso8ediimtheconsote.
2Rdeesethe(n(kd(mTheaudiblsatarmtmmttmsmokedetector
~lcontinuetMuptoloseconds.~~tsacondenerthe
audible elarm's cessa-
one peir ot sounds will be emiltea at the con-
soteastheunl'sdiiyatthewnsolecbars.
CRbmthooymhm~toWnDISARMEDWtouiaIheconsob(seunity
code plus OFF).
Wagram 4. OPERATIONAL FEATURES
Thesmokedet~s9-vonbatteys~bechangedwithinW~tol-
lowingarOWBA~"messageatMeConsde.TheaokedetsCtor
broeonii.
Latch thf y~ector
onto the mountiq mm again bv
tumiqitinaaacbmsa
itsell will also provide a 'Low Battery" indiiion
by producing a 'bwp'
~Hmebatteryisnat~conect)y.thesmolcedetedorr*illNn.
once approximately every 50 seconds.
tunetim. Always test the rmll (as inMated under 'FINAL rrsr')
To~~eMen~.detachthesmoke4etectortraitsmountingplate
mfmr mplacing the winery to ensure that me built-in lransmittel is
bytwistingthedetedorcamtercddw&
R9movetheexisWtgbettmyin
the eetector and reptace with a tresh ttsttby (see GENERAL SPECIRCA-
~~~.nmernitteilstovensmitas~duringthetest.
check tor oomct battely hstauatiorl.
TIONS for rewmmended battery types). See Ctiagran'~ 1 tar proper battery
Diameter 6-W (17 cm)
Height 2-H" (6.4 cm)
VoltageSV from single 9V Atkalii battery. Use Atternco
464. Eveready 522. Duracell MNl604. or equivarent.
TO TtlE INSTALLER
Regular maintenance and inspection (at least annually) by the installer and frequent testing by the user
are vital to continuous satisfactory operation of any alarm system.
The installer should assume the responsibility
of developing and offering a regular maintenance
program to the user as well as acquainting the user with the proper operation and limitations of the
alarm system and its component paa. Recommendations must be included for a specific program of
frequent testing (at least weekly) to insure the system's proper operation at all times.
3
.-.
.-.