ActivePure A1040F Manual - Página 5

Navegue en línea o descargue pdf Manual para Limpiador de aire ActivePure A1040F. ActivePure A1040F 14 páginas.
También para ActivePure A1040F: Manual (16 páginas)

Imprimir página

PLACEMENT OF UNIT

CAUTION:
To prevent injury, be sure the power cord is not accessible to small children.
Place your unit in its permanent location:
•
Unit should be four feet or higher from the ground
•
Never set unit on the floor
•
Place unit in a location away from the HVAC return duct, if applicable
NOTE:
The rear of the unit should always have at least one inch of open area to allow unrestricted airflow.

OPERATION

1.
Insert the Power Supply Plug into the power receptacle on
the rear of the unit. Plug the appropriate cord into the Power
Supply and into a working electrical outlet.
2.
Push the Power button once to turn the unit on.
3.
Push the A-PURE/A-PURE x2 button twice to set it to A-PURE
x2 level which will be illuminated on the screen.
4.
Push the Fan + button four times to reach the highest speed
(5th level).
•
A·PURE MODE: The unit's display shows the
fan speed (low to high) and A·PURE to indicate
that the ActivePure
Cell and ionization are
®
both functioning normally.
•
A·PURE x2 MODE: A·PURE x2 lights up,
indicates that (2) ActivePure
ionization are both functioning normally.
•
ION MODE: Ion lights up, indicates only
ionization is functioning.
•
CLEAN: Clean illuminates when cleaning is
required.
•
RESET: Clears the maintenance reminders
after performing routine maintenance.
•
CELL: The Cell light will flicker when it is time
to replace your ActivePure
Cells and
®
Cell.
®
5