Dynamic Cooking Systems DCS-IVH-48 Instrucciones de instalación - Página 14
Navegue en línea o descargue pdf Instrucciones de instalación para Campana de ventilación Dynamic Cooking Systems DCS-IVH-48. Dynamic Cooking Systems DCS-IVH-48 17 páginas. Island vent hood
También para Dynamic Cooking Systems DCS-IVH-48: Instrucciones de instalación (20 páginas)
Imprimir páginaCa re And Use
CLEANING THE EXTERIOR STAINLESS STEEL FINISH:
When cool the appliance can be cleaned with hot soapy water, rinsed, dried and buffed to a shine with
a soft, heavy pile cloth. Always try this first, as it is the mildest form of cleaning.
1. Some brands of cleaners are harsher than others. Read their instructions.Try on a small
inconspicuous area first.
2. To avoid marring the surface always rub metal finishes in the direction of the polish lines.The
cleaner will be more effective when used in the direction of the polish lines.
3. Use only clean sponges, soft cloths, paper towels, plastic non-metal soap pads for cleaning or
scouring, use only soap pads with soap still in them, a dry pad can scratch the surface.
4. Be sure to rinse thoroughly and to wipe dry to avoid water marks.
FILTERS AND GREASE TRAYS
Filters should be cleaned frequently in a detergent solution and are dishwasher safe. Empty grease
collection tray(s) regularly.
Unplug the Blower Motor before cleaning Ventilator.
• Remove filters to access blower motor plug.Vacuum blower
to clean.
• Do not immerse in water.
• Do not allow and excessive accumulation of grease.
• Use a mild detergent when cleaning.
• Do not use harsh abrasives, steel wool pads, or abrasive
cloths.
CLEANING THE GREASE TRAY
Remove filter(s) by gently pulling up and out.The grease trays can
easily be reached once the filters are removed. Grease collection
trays are easily accessible at the center beneath the filter. See
illustration below for location.
13
FILTERS
GREASE TRAY
DCS-IVH-48
Location of grease trays
DCS-IVH-36