ADEMCO VISTA-20SE Formulario de programación - Página 6
Navegue en línea o descargue pdf Formulario de programación para Control Panel ADEMCO VISTA-20SE. ADEMCO VISTA-20SE 8 páginas. 2-partitioned security system
También para ADEMCO VISTA-20SE: Manual del usuario (4 páginas), Manual del usuario (9 páginas), Formulario de programación (8 páginas)
Imprimir página
TO PROGRAM SYSTEM STATUS, & RESTORE
REPORT CODES (
59Ð
76, &
*
*
With a 3+1 or 4+1 Standard Format: Enter a code in the first
box: 1–9, 0, B, C, D, E, or F. Enter "#+10" for 0, "#+11" for B,
"#+12" for C, "#+13" for D, "#+14" for E, "#+15" for F.
A "0" ( not "#+10") in the first box will disable a report.
A "0" ( not "#+10") in the second box will result in auto matic
advance to the next field when programming.
With an Expanded or 4+2 Format: Enter codes in both boxes
(1st and 2nd digits) for 1–9, 0, or B–F, as de scribed above.
A "0" ( not "#+10") in the second box will eliminate the ex-
panded message for that report.
A "0" ( not "#+10") in both boxes will disable the report.
With Ademco Contact ID Reporting: Enter any digit (other
than "0") in the first box, to enable zone to report (entries in the
second boxes will be ignored).
A "0" ( not "#+10") in the first box will disable the report.
Examples:
For Code 3 (single digit), enter:
For Code 3 2 (two digits), enter:
For Code B 2 (Hexadecimal), enter: #+11 | 2
SYSTEM STATUS REPORT CODES (
Default for all report codes = [00]
59
EXIT ERROR REPORT CODE
*
60
TROUBLE REPORT CODE
*
61
BYPASS REPORT CODE
*
62
AC LOSS REPORT CODE
*
63
LOW BAT REPORT CODE
*
64
TEST REPORT CODE
*
65
OPEN REPORT CODE
*
66
ARM AWAY/STAY RPT CODE
*
† 2nd digit is automatically sent as the 2nd digit of the
zone alarm report code programmed in
expanded or 4+2 report ing is selected.
†† 2nd digit is automatically sent as the user number if
expanded or 4+2 reporting is selected.
67
RF XMTR LOW BAT REPORT CODE
*
68
CANCEL REPORT CODE
*
RESTORE REPORT CODES (
Default for all restore report codes = [00]
70
ALARM RESTORE RPT CODE
*
2nd digit is automatically sent as the 2nd digit of
the zone alarm report code programmed in
expanded or 4+2 re porting is selected.
71
TROUBLE RESTORE RPT CODE
*
72
BYPASS RESTORE RPT CODE
*
73
AC RESTORE RPT CODE
*
74
LOW BAT RESTORE RPT CODE
*
Reports with Partition 1 Subscriber No.
t
89):
*
3 | 0
3 | 2
59–
68)
*
*
|
|
|
t
|
t
|
††
Part. 1
††
Part. 2
††
Part. 1
AWAY STAY
††
Part. 2
AWAY STAY
56, if
*
|
|
70–
76)
*
*
56, if
*
|
|
|
t
|
t
75
RF XMTR LO BAT RST RPT CODE
*
76
TEST RESTORE RPT CODE
*
OUTPUT AND SYSTEM SETUP (
80
OUTPUT RELAYS AND
*
POWERLINE CARRIER
DEVICES
81
ZONE LISTS FOR OUTPUT
*
DEVICES
82
CUSTOM ALPHA EDITING:
*
56): See procedure in instructions.
*
83
SEQUENTIAL LEARN MODE
*
field
56): See procedure in instructions.
*
89
EVENT LOG 80% FULL RPT CODE
*
90
EVENT LOGGING
*
0 = None; 1 = Alarm/Alarm Restore;
2 = Trouble/Trouble Restore; 4 = Bypass/Bypass
Restore; 8 = Open/Close.
Example: To select "Alarm/Alarm Restore", and
"Open/Close", enter 9 (1 + 8);
Note: System messages are logged when any non-
zero selection is made.
91
OPTION SELECTION (AAV)
*
0 = None; 4 = AAV;"0" for UL installations.
92
PHONE LINE MONITOR ENABLE
*
0 = Not used
1 = Keypad display when line is faulted
2 = Keypad display plus keypad trouble sound
3 = Same as "2", plus Device #2 STARTS. If either
partition is armed, external sounder activates also.
Note:Ê Device #2 must either be programmed to be
STOPPED in field
93
No. OF REPORTS IN ARMED PERIOD [0]
*
0 = 10 Alarm/Alarm Restore Reports; 1 = Unlimited.
"1" for UL installations.
DOWNLOAD INFORMATION (
94
DOWNLOAD PHONE No.
*
|
|
|
|
Enter up to 16 digits, 0–9; #+11 for '*'; #+12 for '#'; #+13 for
a pause. Do not fill unused spaces. If fewer than 16 digits
entered, exit field by pressing
next field). To clear entries from field, press
Note: In UL installations, down loading may only be
performed if a technician is at the site.
95
RING DET COUNT FOR DOWNLOADING[0]
*
0 = Disable Station Initiated Download; 1–14 = number
of rings (1–9, # +10 =10, # +11 =11, # +12 =12,
# +13 =13, # +14 =14); 15 = answering machine defeat
(# +15 =15)
Note: Do not enter "0" if using 4285 Voice Module.
96
INITIALIZES DOWNLOAD ID, SUBSCRIBER
*
ACCOUNT No. FOR INITIAL DOWNLOAD:
No data entry required.
97
SETS ALL PROGRAM FIELDS TO DEFAULT
*
VALUES:
No data entry required.
98
Exits programming mode and prevents re-entry
*
by: Installer Code + 8+ 0 + 0. If
exit programming mode, system must be
powered down, and method 1 above used to
enter the programming mode.
99
Exits programming mode and allows re-entry
*
by: Installer Code + 8 + 0 + 0 or: Power-up, then
press "
" and "#" within 50 seconds of power up.
*
– 6 –
80–
93)
*
*
Program only if
Relays and/or
Powerline Carrier
devices are to be
used. See next page.
(Also entered from field
(Also entered from
To select all, enter #15.
*
80 or STOPPED by Code + # + 8 + 2.
94,
95)
*
*
|
|
|
|
|
|
|
|
(and press 95, if entering
*
98 is used to
*
|
|
|
[3]
[0]
[0]
|
|
|
94
.
*
*