Autometers Systems IC 970 Manual de instalación y funcionamiento - Página 5
Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Instrumentos de medida Autometers Systems IC 970. Autometers Systems IC 970 12 páginas.
Imprimir página
To change the pulse closure time
Code 22 (switch 8 on)
Please follow these instructions precisely.
1. Press Function Key
The display will change to.
You will notice the cursor is flashing at the first digit on the left of the two digits
Press the key with 2 on it, the cursor will now move to the next digit, now press 2.
Press Enter.
The display will change to.
You will notice the cursor is flashing at the first digit on the left TO ALTER THE time
Select the number and press the key, the cursor will now move to the next digit to the right.
When finished
Impor tant.
The pulse time can be set from 20ms to 300ms. If it is above 300ms, the default
time is 100ms.
Press Enter.
The meter will automatically take you back to the default display.
The kVah pulse output will automatically be set to the same value.
8
To change the display contrast
Code 30 (switch 8 on)
Please follow these instructions precisely.
1. Press Function Key
The display will change to.
You will notice the cursor is flashing at the first digit on the left of the two digits
Press the key with 3 on it, the cursor will now move to the next digit, now press 0.
Press Enter.
The display will change to.
You will notice the cursor is flashing at the first digit on the left (+)
To Increase Contrast Press The Key "Energy Imp" The contrast will star t to go darker.
Keep pressing until you have reached your desired setting
( - ) Press the "Energy Exp" key to lighten the display.
When finished
Press Enter.
The meter will automatically take you back to the default display.
9