Automile Tracker Solar Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para GPS Automile Tracker Solar. Automile Tracker Solar 16 páginas.

Mini. The external voltage sensor allows

you to set up alerts for when an external

battery drops below or rises above a

certain voltage. Operating time makes

it possible to measure for how long an

asset has been used. A common use

case is to monitor the operating time of

an excavator.

Expected battery time

Tracker Solar has a near-infinite battery

time. Even in lowlight conditions with

only a few hours of sunlight per month,

the device will work for many years.

To further enhance battery time, use

the optional 8–30V wiring harness to

hardwire the tracker to external power.

Automile Tracker Solar is IP67 classed,

meaning it is dust and water proof. The

device can be dropped into a body of

water up to 3.3 ft / 1 m deep for 30 min.

All communication between Automile's

cloud service and the device is XTEA

encrypted (eXtended Tiny Encryption

Algorithm). The apps communicate with

the cloud service through the use of

military graded AES-256.

Connect up to 10 external 1-Wire sensors

such as the Automile Temperature and

Humidity Sensor. Screw one end of the

sensor cable to the tracker and the

other end to the sensor, which will then

be auto-detected in a few minutes.

Each sensor has two female connectors

so that you can chain sensors. Sensors

draw power from the device so there is

no need for separate batteries.

Set up custom alerts and thresholds,

and get access to specific reports with

all sensor readings.

Sensor cables come in three lengths:

10 ft, 32 ft, 64 ft (3 m, 10 m, 20 m).