GALA mitta Manual de instalación - Página 9

Navegue en línea o descargue pdf Manual de instalación para Sanitarios GALA mitta. GALA mitta 12 páginas. Hydromassage bathtubs
También para GALA mitta: Manual del usuario (16 páginas), Manual de instalación (12 páginas), Manual del usuario (16 páginas), Manual de instrucciones de instalación (12 páginas)

The electrical installation must comply with low voltage regulations and with the corresponding

regulations of each country.

1. Installation

Electrical connections must provide a minimum of

Ipx5 protection within volume 1. A connecting box (in

accordance with the protection established) is

recommended. Care must also be taken to make this

connection at a height of more than 20 mm above the

floor.

No part of the bath should be situated above it while in

use.

Sections containing live parts, except those powered

by a very low safe voltage that does not exceed 12 V,

must be inaccessible to a person inside the bath.

No switches, power sockets or light fittings shall be

installed in volumes 0 and 1. Above these volumes it

shall be permissible to have sound control contactors

operated by a draw-cord or chain of non-hygroscopic

material.

Switches shall not be installed in volume 2, however

safety power sockets can be installed. Fixed light

fittings may also be installed, preferably with category

II insulation or, if unavailable, install those which do

not have any accessible metallic part. In the lamp

holders it shall not be possible to make any accidental

contact with live parts when inserting or removing

bulbs. In such light fittings no switches or power

sockets are allowed, except if these are safety power

sockets.

2. Wiring

The power cable used must be the one supplied with the bath or another of similar characteristics (with

the cover having characteristics not inferior to type H05 V V-F), taking into account the maximum voltage

stipulated in the low voltage regulations. The section of cable supplied is 1,5 mm .

The bath must be permanently connected to the electrical mains, with no extensions, and to the earth

installation. The use of a plug socket is not acceptable. Therefore, an electrical junction box must be

provided for connecting to the cable that supplies the bath. Said box will be of IPx5 type, fitted 20 cm

above the ground.

Installation manual

ELECTRICAL INSTALLATION

Volume 0

Volume 1

24 9

Fig-3