Celestron NexImage 95518 Manual del usuario - Página 3
Navegue en línea o descargue pdf Manual del usuario para Cámara digital Celestron NexImage 95518. Celestron NexImage 95518 12 páginas. Solar system imaging camera
También para Celestron NexImage 95518: Manual del usuario (7 páginas)
Imprimir página
Quick Start
1. Place the CD into your computer's
CD-ROM drive.
2. Install both the NexImage iCap and
RegiStax software onto your computer.
3. Thread the 1.25" nose piece into the body
of the NexImage camera. See Fig 2.
4. Slide the 1.25" nose piece of the camera
into the eyepiece barrel of your telescope.
See Fig 3.
5. Plug the small end of the USB cable into
the port on the back of the camera.
6. Plug the other end of the USB cable
into a USB port on your computer.
Once connected, the Found New
Hardware message will appear. Follow
the Installation Wizard until the device
has been successfully installed.
Fig 2
Fig 3
3
ENGLISH
|