CELETTE CEL.11245-C-02 Manual original - Página 8

Navegue en línea o descargue pdf Manual original para Sistema de soldadura CELETTE CEL.11245-C-02. CELETTE CEL.11245-C-02 15 páginas.

3. MATTERS NEED ATTENTION:

1. Input power is AC220≥15A.

2. Turn "off " the switch, the machine is not use.

3. Make sure to turn "off" the switch while connecting (or) dis-connecting the cable to the AC supply.

4. The machine maintenance and repair must turn "off " the switch after 5 minutes.

5. The stud clamp is inside the stud welding torch. The inside diameter of stud clamp must suitable the

stud screw. Do not use worn stud clamp.

6. Stud welding may cause welding arc and metal spatter, protect yourself with appropriate safety

garments and goggles.

7. Make sure there are no flammable materials near the work area.

NOTE:

1. The torch cable and earth use the euro-type quick connector. Please push the plug to the end of the

socket, torch cable to "Torch" socket, earth cable to "EARTH" socket, and turn right, they will connect well.

2. T he input cable and control cable connectors have screw. Please lock the screw to fixed the

connector.

3. The earth cable must use clamp to fix on the base metal.

4. All cables must be kept straight. If the cables are winded, it will interfere with the stud welding.

FOR SPOT WELDING:

www.celette.com

1. Washer contact

to work piece

CONTROL CABLE

EARTH CABLES

2. Discrage-arc

SPOT WELDING TORCH

WORK PIECE

3. Finish welding

Page No: 8