Dynamic Precision DPA 6.4 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Amplificador Dynamic Precision DPA 6.4. Dynamic Precision DPA 6.4 13 páginas.

Power supply OFF/ON switch.

SIGNAL:

Indicates an input signal of at least 5 mV.

Indicates ≥ 1% harmonic distortion on the output signal.

CLIP:

POWER:

Indicates that the amplifier is turned on.

STANDBY:

Illuminates for a while when the power is turned on, and during the following situations:

Note: High frequency signals is here defined as frequencies higher than 200kHz.

When «STANDBY» is lit, the input signal is muted, and in turn, the amplifier's power supply will be

shut down, and simultaneously the loudspeaker outputs will be short-circuited. The «STANDBY» LED

will start to flicker to indicate periodic muting of the input signal due to a high degree of signal clipping

in the range of 15-20 kHz.

DPA 6.4

Figure 1. DPA 6.4 front panel

SWITCHES

INDICATORS

Temperatures higher than 110 °C measured on the cooling bracket.

DC-voltage on either input or output terminals.

High frequency signals on either input or output terminals.

SWITCHES AND INDICATORS

PAGE