Automotive Data Solutions 99997 2450RF Manual del usuario - Página 9
Navegue en línea o descargue pdf Manual del usuario para Arranque a distancia Automotive Data Solutions 99997 2450RF. Automotive Data Solutions 99997 2450RF 17 páginas.
Imprimir página
1. Insert a 25 cent coin into the hollow corner of your iDatastart remote.
2. Gently twist the coin until the casing pops open.
3. Use your coin to pry open the rest of the case perimeter.
4. Carefully remove the circuit board from the case.
5. Slide the old battery out of its enclosure and replace with the new battery.
6. Carefully replace the circuit board into bottom half of the casing.
7. Snap top and bottom casings back together using your hands.
REMOTE STARTING FROM FACTORY KEY FOB
Your iDatastart system may enable remote engine start by performing one of the following button sequences on
your factory key fob:
BUTTON
Press on
Press on
OR
BUTTON
Press on
Press on
NOTE: This feature may not be supported on some vehicles. If supported, the chosen button sequence will be
communicated to you by your iDatastart Authorized Dealer at the time of installation. The remote start range
will be equal to your factory key fob's door lock range.
FUNCTION
Start engine
Stop engine
FUNCTION
Start engine
Stop engine
2022-04-7 © Automotive Data Solutions Inc. 9/16
99997 2450RF