ActiVHeat 9BHWSL3 Series Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Accesorios ActiVHeat 9BHWSL3 Series. ActiVHeat 9BHWSL3 Series 7 páginas. Heated sock liners

3. Each Battery Pack should be inserted into the pocket on an Ankle Wrap

with the switch accessible and the heat level light visible through the top

window panel of the Ankle Wrap. Close Ankle Wrap cover to secure the

Battery

Pack.

4. Fit the An-

kle Wrap

on your

lower leg

with the

window

facing upward towards your waist. The Battery Pack should

located on the OUTSIDE of your leg. Adjust for fit.

5. Pull on a pair of outer socks to trap the heat gener-

ated by the heated sock liners. Put on your shoes.

6. Your ActiVHeat

Adjusting the Heat Level

The ActiVHeat

switch and a colored Heat Level Light on one end

which varies from Red, Green or Off when you slide

the switch between the three positions.

No Light = OFF (NO HEAT)

Red = Up to 2 hours* (HIGH HEAT)

Green = Up to 6 hours* (LOW HEAT)

* Actual operating hours are dependant upon the en-

ergy capacity and drain capacity of the batteries used.

Higher capacity and higher drain batteries

will perform longer and/or hotter.

Warning:

Do not use the battery pack:

a) when it is wet, or

b) when ambient temperature is above

85°F (~30°C).

Keep batteries away from fire and other

heat sources to avoid the risk of explo-

sion. Always keep the Battery Pack out

of reach of children.

Getting the Best Results

The sock liners should be worn against your skin, and you should wear an

outer sock to trap the heat around your feet.

sock liners are now ready to use.

Battery Pack has a 3-position slide