HIFEI Technology Fulcrum Pro+ 300A Manual

Navegue en línea o descargue pdf Manual para Controlador HIFEI Technology Fulcrum Pro+ 300A. HIFEI Technology Fulcrum Pro+ 300A 12 páginas. Brushless speed controller

Imprimir página

Fulcrum Pro/Pro+ 300A Brushless Speed Controller Manuals

Pro/Pro+ 300A

Brushless ESC Instructions

Fulcrum series

Thanks for purchasing

Chongqing HIFEI Technology Co., Ltd.

extremely powerful ESC for model aircraft and helicopter.

Contents

Part Ⅰ:Using Warnings ... ... ... ... ... ... ... ... ... P2

Part Ⅱ:ESC Specifications ... ... ... ... ... ... ... ...P3-P6

Part Ш:Using the ESC ... ... ... ... ... ... ... ... ... P7-P9

Part Ⅳ:Program the ESC by soft ... ... ... ... ... ...P10-P19

Part Ⅴ:Trouble shooting ... ... ... ... ... ... ... ... ...P20

Part VI: Warranty Clause... ... ... ... ... ... ... ... ...P21-P24

www.hifei.com

brushless speed controller manufactured by

Fulcrum series

ESC are super HV and

Page 1

Fulcrum Pro/Pro+ 300A Brushless Speed Controller Manuals

ⅠUsing Warnings

· The brushless ESC is specially designed for R/C electric powered model aircrafts, helicopters

and EDF, which are not toys. It is suggested ONLY adults can run it, and little children must run it

under wardship of adults.

·Please read the ESC's specifications and correctly connect ESC to battery pack at right voltage.

·When connecting the ESC to battery pack, please ensure the polarity is correct.

Incorrect polarity connecting will cause short-circuit and permanent damage to the ESC, such

damage is not covered by manufacturer's WARRANTY.

·Before the flying, turn on the transmitter

·When finish the flying, power off the receiver

·Never disconnect the battery pack while the motor is running, as this could cause damage to the

speed controller and/or motor.

·Connectors with low conductivity may cause erratic motor rotations or other unexpected

movements.

·Please keep the propeller away from humans or any other objects.

·It can change the motor's rotation direction by swapping any two motor wires connecting.

·Each new ESC is preset with default parameters in factory, which can be assembled for flying

directly. But in order to obtain optimum power performance and well compatible to work with the

brushless motor. It is suggested to set the appropriate parameters before assemble it to hull for

flying.

·The ESC wick cut-off output when no signal is checked within 100ms.

·Please calibrate the throttle range of the transmitter when it is your first time to use a new

controller or when you change a new/different transmitter or receiver.

·When finish the using of Hifei software ' V4.xx', close the software first, then pull out the USB

linker from your PC, or it may cause the crash of the computer.

www.hifei.com

BEFORE

powering on the receiver.

BEFORE

turning off the transmitter.

Page 2