Automotive Diagnostics 10 Series Manual de inicio - Página 4
Navegue en línea o descargue pdf Manual de inicio para Equipos de diagnóstico Automotive Diagnostics 10 Series. Automotive Diagnostics 10 Series 4 páginas.
Imprimir página
2 Registration and Software Update
Please connect you Series 10 tablet to your Wi-Fi network, click on the
icon to register the unit as well as to update the software.
General Notice
For your own safety and the safety of others, and to prevent damage to the equipment
and vehicles, read this manual thoroughly before operating. The safety messages
presented below and throughout this user's manual are reminders to the operator to
exercise extreme care when using this device. Always refer to and follow safety messages
and test procedures provided by the vehicle manufacturer. Read, understand, and follow
all safety messages and instructions in the manual.
Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the Series 10, read the full
instruction manual first and observe the following safety precautions at a minimum
whenever working on a vehicle:
Always perform automotive testing in a safe environment. Wear safety eye protection that
meets CE/ANSI standards. Keep clothing, hair, hands, tools, test equipment, etc. away
from all moving or hot engine parts. Operate the vehicle in a well-ventilated work area:
Exhaust gases are poisonous. Put blocks in front of the drive wheels and never leave the
vehicle unattended while running tests.
Use extreme caution when working around the ignition coil, distributor cap, ignition wires
and spark plugs. These components create hazardous voltages when the engine is
running.
Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual
transmission) and make sure the parking brake is engaged.
Keep a fire extinguisher suitable for gasoline/chemical/ electrical fires nearby. Ignition is
on or the engine is running.
Keep the Series 10 dry, clean, free from oil/water or grease. Use a mild detergent on a
clean cloth to clean the outside of the scan tool, when necessary.
For further information please go to
www.automotivediagnosticsintl.com
4