ADEN POWERKIT GO Manual de instrucciones y montaje - Página 10

Navegue en línea o descargue pdf Manual de instrucciones y montaje para Accesorios para bicicletas ADEN POWERKIT GO. ADEN POWERKIT GO 16 páginas.

POWERKIT GO — ASSEMBLY INSTRUCTIONS

ADEN GmbH

ASSEMBLY

The thumb lever will be mounted in the desired location on the

handlebars with an Allen key size 3 and laid

down along the frame towards the bottom bracket/drive unit.

Assembly-Note:

Make sure that a loop has to be laid for the steering angle as

with the other lines.

Yellow plug to yellow socket

Alternatively, the twist grip can also be used.

This is always mounted on the right side of the handlebar with a

Allen key size 3.

The cables are laid as in the previous point.

Then lay the motor cable with the enclosed Velcro strips along

the frame in the direction of the battery.

Attention:

While driving, make sure that the cable does not interfere in

any way, nor touch any moving parts.

This completes the assembly of the motor.

This is followed by the assembly of the "Powerpack battery"

www.aden-sports.com

EN | P. 10