Celiera KFR-51GW/Ga Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Aire acondicionado Celiera KFR-51GW/Ga. Celiera KFR-51GW/Ga 14 páginas. Split wall-mounted air conditioner
Imprimir páginaUSER'S
It is convenient to set the timer
for the time when you go to
bed ,when you get
home ,when you get up , ect.
ooo
*ffP
OUT FLAP
»0£
oo
O O O
HOUR
HI"
(
How to set the ON timer
)
2
Press the AUTO START button to set the on timer
mode when the AC is in the standby mode.
Each time the button is pressed, the ON timer mode alternates between
ON and
OFF.
Set the time of the timer using the HOUR and MIN buttons.
Each time the HOUR button is pressed , the Set time is counted up by 1
hour; each time the "MIN" button Is pressed, the set time is counted by
10 minutes.
• To release the ON timer:
Press the AUTO START button to release the timer.
(
HOW to set the OFF timer
)
_
Press the AUTO STOP button to set the OFF timer
mode during operation.
™
Each time the button is pressed, the OFF timer mode alternates beteen ON and
•
OFF.
set the time of the timer using the HOUR and MIN buttons.
Each time the HOUR button is pressed , the Set time is counted up by 1
hour; each time the "MIN" button is pressed, the set time is counted by
10 minutes.
• TO release the OFF timer:
Press the AUTO STOP button to release the timer.
Programmnig timer operation
The ON timer and OFF timer can be used in combination .The time of the set time which is
reached first will operate first (^
» mark indicates the order of timer operations.)
• If the current time has not been set ,the timer operation cannot be done.
[Features of Heating Operations]
Basic principles and performances
O The machines absorb heat from the outdoor air and transfer it indoors so as to heat the room air. The heating capabilities
through this principle of heat pump go up/down with the increase/decrease of the temperatures of the outdoor air.
O
It only needs a fairly short time for such hot air circulation system to raise the room temperature.
0
When the outdoor air temperature is very low, the system can be used together with other heating devices. But good
ventilation should be maintained to ensure safety and prevent accidents.
Defrosting
When the outdoor air temperature is very low and humidity is very high, frosting will occur to the heat exchanger of the outdoor
unit, which has negative impacts upon the efficiency of the heating performance. In such case, the automatic defrosting function
will come into play. The heating operation will be stopped for 5-10 minutes to do the defrosting.
O The fans of both the outdoor and indoor units are stopped. During the defrosting operation, the run light will flash
slowly.
0
During the defrosting, the outdoor unit might generate some steam. It is caused by fast defrosting, which is not a
performance failure.
0
Upon the completion of the defrosting process, the heating operation is resumed.