Aire 3828AR7314S Manual de instrucciones de instalación - Página 11

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Aire acondicionado Aire 3828AR7314S. Aire 3828AR7314S 16 páginas. Single split wall mounted air conditioner

Imprimir página

CONNECTING THE CABLE BETWEEN INDOOR UNIT AND OUTDOOR UNIT

Connect the cable to the

Indoor unit.

Connect the cable to the indoor unit by

connecting the wires to the terminals on the

control board individually according to the

outdoor unit connection.

(Ensure that the color of the wires of the

outdoor unit and the terminal No. are the same

as those of the indoor unit.)

• Cooling model

Terminals on the indoor unit

Color of Wires

Terminals on the outdoor unit

• Heat pump model

Terminals on the indoor unit

Color of Wires

Terminals on the outdoor unit

CAUTION

If a power plug is not to be used, provide a circuit breaker between power source and the unit as shown below.

2(N)

1(L)

BROWN BLUE GREEN/YELLOW

1(L)

2(N)

1(L)

BROWN BLUE

G/Y

BLACK

RED

BLACK

BROWN

G/Y

RED

BROWN BLUE

BLUE

G/Y

RED

1(L)

2(N)

Main power source

Air

Conditioner

CAUTION

The power cord connected to the indoor unit should

be complied with the following specifications

(Type H05VV-F approved by HAR or SAA).

Capacity

(Btu/h)

The power connecting cable connected to the

indoor and outdoor unit should be complied with the

following specifications

(Type H07RN-F approved by HAR or SAA).

Capacity

(Btu/h)

The connecting cable connected to the indoor and

outdoor unit should be complied with the following

specifications

(Type H07RN-F approved by HAR or SAA).

The length of the power supply cord should be

over 1.8m measured from the power supply cord

entry of the cabinet to the middle of the live pin

of the plug.

Circuit Breaker

Use a circuit

breaker or time

delay fuse.

NORMAL CROSS

-SECTIONAL AREA

18K

1.5mm

24K

2.5mm

26K

NORMAL CROSS

-SECTIONAL AREA

18K

1.5mm

24K

2.5mm

26K

NORMAL

CROSS-SECTIONAL

AREA 0.75mm