celitron TWE-12100 Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Sistemas de filtración de agua celitron TWE-12100. celitron TWE-12100 10 páginas. Advanced water purifier system

Imprimir página

Connecting the unit to the drain using the kit

1. Drill a hole on the public drain pipe ( min. 6.5, max 10 mm).

2. Place the two clamps on the pipe in a way, that the hole on the drain pipe is concentrical to the

hole on the clamp's hole which has a nut on it. Between this clamp and the pipe, put the rubber

sealing. The rubber sealing has on one side a self-adhesive film on it, so you can glue it to the pipe,

too.

3. Using the supplied screws, tight the two clamps together.

4. Insert the pipe nut on the 6 mm plastic pipe.

5. Firmly insert the pipe with the nut into the drain pipe. The 6 mm plastic pipe's end should over-

hang from the drain's pipe wall at least 3 mm.

6. Tight the nut carefully.

RO manual version 1.0

Sting 11 B

supplied

CELITRON MEDICAL TECHNOLOGIES KFT