Autonics BD-300 Manual del producto

Navegue en línea o descargue pdf Manual del producto para Accesorios Autonics BD-300. Autonics BD-300 5 páginas. Laser displacement sensors

Imprimir página

TCD220047AC

Laser Displacement Sensors

: Sensor head

(diffuse reflective type)

BD Series

PRODUCT MANUAL

For your safety, read and follow the considerations written in the instruction

manual, other manuals and Autonics website.

The specifications, dimensions, etc. are subject to change without notice for product

improvement. Some models may be discontinued without notice.

Features

• Reference distance :30/65/100/300/600 mm

• Easy maintenance with detachable sensor head/amplifier unit

• Maximum resolution: 1㎛ (vary by model)

• Accurate measurement with minimal influence from target color or material

• Interconnection of up to 8 sensor amplifier units

: Mutual interference prevention function and auto channel sorting

• Various calculation functions supported (addition, subtraction, average)

• Various filter functions for stable measurement (movement average, differential,

median)

• Auto sensitivity adjustment (1-point, 2-point teaching)

• Dedicated software provided (atDisplacement)

• DIN rail and wall mount support (bracket accessory required for wall mount)

• Sensor head: IP67 protection structure

※ Sensor head model BD-300/600 supports only over 5.0 firmware version of the

amplifier unit (BD-A1).

ᜢ ᜽ ᜧ

Safety Considerations

• Observe all 'Safety Considerations' for safe and proper operation to avoid hazards.

• ᜸ symbol indicates caution due to special circumstances in which hazards may occur.

᜸ Warning

Failure to follow instructions may result in serious injury or death.

01. Fail-safe device must be installed when using the unit with machinery that may

cause serious injury or substantial economic loss.(e.g. nuclear power control,

medical equipment, ships, vehicles, railways, aircraft, combustion apparatus,

safety equipment, crime/disaster prevention devices, etc.)

Failure to follow this instruction may result in personal injury, economic loss or fire.

02. Do not use the unit in the place where flammable/explosive/corrosive gas, high

humidity, direct sunlight, radiant heat, vibration, impact or salinity may be

present.

Failure to follow this instruction may result in explosion or fire.

03. Do not disassemble or modify the unit.

Failure to follow this instruction may result in fire.

04. Do not connect, repair, or inspect the unit while connected to a power source.

Failure to follow this instruction may result in fire.

᜸ Caution

Failure to follow instructions may result in injury or product damage.

01. Use the unit within the rated specifications.

Failure to follow this instruction may result in fire or product damage.

02. Use a dry cloth to clean the unit, and do not use water or organic solvent.

Failure to follow this instruction may result in fire.

03. Mount the ferrite core to specified position before using.

Failure to follow this instruction may result in output with noise.

Cautions during Use

• Follow instructions in 'Cautions during Use' . Otherwise, it may cause unexpected accidents.

• The power supply should be insulated and limited voltage/current or Class 2, SELV power

supply device.

• Do not install where strong magnetic or electric field exist. Otherwise, the resolution may be

adversely affected.

• Mutual optical interference between laser sensors and photoelectric sensors may result in

malfunction.

• Mutual optical interference between laser sensors may result in malfunction.

• When connecting DC relay or other inductive load to the output, remove surge by using diode

or varistor.

• Since external disturbance light (sunlight, fluorescent lighting, etc.) can cause product

malfunction, use the product with a light shield or slit.

• When detecting with the maximum sensitivity, an error may occur depending on each

characteristic deviation.

• This unit may be used in the following environments.

- Indoors (in the environment condition rated in 'Specifications')

- Altitude max. 2,000 m

- Pollution degree 2

- Installation category II

Safety precautions during Use Laser Equipment

Failure to follow this instruction may result in physical disability(e.g., eyes or skin)

• If the product is handled arbitrarily without following the instructions, it may cause laser

injury.

• Do not stare at the laser emitter.

• Do not stare directly or indirectly at the laser beam or direct it to the human eye.

• Do not deliberately project laser light onto a person.

• Install the laser light path so that it does not pass at eye level.

• Consider the optical path of the laser beam.

If there is a risk of contact with the reflected light due to mirror reflection/diffusion

reflection, install a barrier to block the reflected light.