DBI SALA Anchor on the Go Manual de instrucciones de instalación y funcionamiento - Página 9

Navegue en línea o descargue pdf Manual de instrucciones de instalación y funcionamiento para Equipamiento industrial DBI SALA Anchor on the Go. DBI SALA Anchor on the Go 20 páginas. Portable roof anchor for metal roofs

Imprimir página

1. Installing Anchor on the Go™ on the Roof

WARNING: If it is unclear to the operator or competent person that the

supporting structure, roof sheeting or anchor is structurally inadequate,

they must be assessed by an engineer.

Step 4: Once you have safely ascended the ladder, slide the bottom

angle iron of the portable roof anchor under the roof sheeting. The

cylindrical support post must rest in the pan of the roof sheeting. Both

locking cam levers must also be located within the roof sheeting pans.

If they do not fit within the pan, reposition the locking cams into an

alternative adjustment position along the L-angle until they do. Note:

When adjusting the position of the locking levers, ensure left and right

levers are correctly installed. Refer to section 6, Figure Eight a & b for

correct orientation.

Figure Four

Step 5: Securely push down

Figure Five

locking cam levers onto roof

sheeting to achieve a solid

connection. Once the anchor is

attached and your anchorage

line is secured to the anchor

point, throw the rope over

to the other side of the roof

such that the anchor line is

accessible

without

climbing

onto the roof. Refer to Figure

Five.