Autonics TZN4M Manual - Página 11
Navegue en línea o descargue pdf Manual para Controlador Autonics TZN4M. Autonics TZN4M 17 páginas. Dual pid control temperature controller
También para Autonics TZN4M: Manual (4 páginas), Manual de instrucciones (2 páginas), Manual (16 páginas), Manual (16 páginas), Manual (17 páginas)
Imprimir página
TZN/TZ Series
● Parameter group 2
RUN mode
3 sec
PV display
Input type
IN-T
Event 1
EU-1
Event 2
EU-2
Alarm
AL-T
option
Auto-tuning
AtT
mode
PID method
PIDT
Heating/
O-FT
Cooling
Temperature
UNIT
unit
SV
H-SC
high-limit
SV
L-SC
low-limit
Decimal
DOT
point
Trans. output
FS-H
high-limit
Trans. output
FS-L
low-limit
Ramp
RAMP
function
Com.
BPS
speed
Com.
ADRS
address
Lock
LOC
J-150
+
3 sec
SV display
※ 1
Setting range: refer to '
KCaH
※ 2
AL-1
AL-2
Setting range: refer to ' Alarm'.
AL-A
※ Does not appear when Event 1/2 [EU-1, EU-2] is set to AL-0, LBA, SBA.
TVN1
PIdS
HEAT
?C
1300
Setting range: refer to '
`00
Setting range: 0, )0, )00, )000
0
※ Only appears with analog input.
1300
`00
OFF
2400
Setting range: 1 to 99 (address)
01
OFF
※ 1:
:
( )key-Switch fields,
※ 2: Press the
key after checking or changing the values in parameter
settings to save the setting value and move to the next parameter.
※ Hold the
key for 3 sec anytime during parameter settings to save the setting
value and return to RUN mode.
※ The dotted line parameters
other parameter settings.
Input Type and Range'.
Setting range: refer to ' Alarm'.
※ Event 2 [EU-2] only appears in models that support Event 2 output.
TVN2
PIdF
※ Please set according to control application. Do not change the
COOL
settings during operation. It may result in fire or accidents.
?F
Input Type and Range'.
Setting range: refer to '
Input Type and Range'.
※ Only appears in models that support PV transmission.
ON
4800
9600
Setting range:
ON
,
key-Change values
may not appear depending on the model or
※ Only appears in models
that support RS485
communication
Unlock
OFF
Lock parameter 2
ON