909 909210TS Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Sierra 909 909210TS. 909 909210TS 18 páginas. 1200w 210mm 8" table saw

Imprimir página

Introduction

Your new 909 power tool will more than satisfy

your expectations. It has been manufactured under

stringent 909 Quality Standards to meet superior

performance criteria.

You will find your new tool easy and safe to operate,

and, with proper care, it will give you many years

of dependable service.

CAUTION.

Carefully read through this entire Instruction

Manual before using your new 909 Power Tool. Take

special care to heed the Cautions and Warnings.

Your 909 power tool has many features that will make

your job faster and easier. Safety, performance, and

dependability have been given top priority in the

development of this tool, making it easy to maintain

and operate.

Environmental protection

Recycle unwanted materials instead

of disposing of them as waste. All tools,

hoses and packaging should be sorted,

taken to the local recycling centre and

disposed of in an environmentally safe way.

WARNINGS

It may be more difficult to see the laser line in conditions of

bright sunshine and on certain surfaces.

Description of symbols

The rating plate on your tool may show symbols.

These represent important information about the

product or instructions on its use.

Wear hearing protection.

Wear eye protection.

Wear breathing protection.

Double insulated for additional protection.

Conforms to relevant standards

for electromagnetic compatibility.

For safe operation read instruction manual.

Specifications

Voltage:

Power Rating:

No Load Speed:

Maximum Cutting Depth at 90°: 48mm

Maximum Cutting Depth at 45°: 45mm

Saw Blade:

Saw Blade Type:

Bevel Capacity:

Dust Extraction Port:

Table Size:

Net Weight:

Note.

Do not use a blade that is thinner than the riving

knife. Do not use a blade that is thicker than 3.5mm.

230 – 240Vac ~ 50Hz

1200W

4800RPM

Ø210mm x Ø16mm bore x 2.6mm

TCT (Tungsten Carbide Tipped)

0 – 45°

Ø36mm

Without Extension Tables:

525mm x 400mm

With Extension Tables:

525mm x 620mm

14kg